DEM011TG SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER
Port: Shanghai or Ningbo
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,Western Union,MoneyGram
Contact SupplierPackaging Detail: Export standard package
Delivery Detail: 20Days
Functions and features |
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 67 mm), users can choose any one by themselves. 2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993. 3. 5+1 digits display (99999.1kWh) by step motor type impulse register. 4. Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse output passive (nonpolarity), (Product Configuration code is TI). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864. 5. Two LED instructions power supply state (green) and signal of energy impulse (red). 6. Standard configuration don’t detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions (Only red energy pulse signal when working, that is meaning the direction of the flow of load current reverse). 7. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21. 8. Directly connect operation, there are two types wiring you may select. Standard configuration type T wiring, may select type Swiring (Product Configuration code is AG). 9. Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is TH). |
Technical parameters
Model | Accuracy | Reference voltage (V) | Current specifications (A) | Starting current (A) | Insulation performance |
DEM011TG | Class 1 | 127 230 | 5(30) 10(50) 20(100) | 0.02 0.04 0.08 | AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV |
Outer and mount dimension
Wiring diagram (Type T)
Terminal | Note |
L | Phase line (Inlet from bottom, outlet from top) |
N | Neutral line (Inlet from bottom, outlet from top) |
2 and 3 | Port of pulse output passive |
Type T wiring: You needn't cut the cable when wiring, please let cable through the meter wiring hole |