DEM341AM - DEM341AM

2. Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month.

3. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the

4. May select cycle display (default) or push the button itemized display, we can set the cycle display, it can display 14 data at most. Can

5. There are a polarity port of pulse output passive closed and a nonpolarity port of pulse output passive distant, the output rate is 10 or 100

6. There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter. Set and operation have

7. Ten LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just

8. Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of

9. Standard configuration for direct connect operation, type 16B wiring, we can also choose another type of wiring, and use CT (Product

10. Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is AL). Configuration code is AO) and PT & CT (Product Configuration code is AQ), type 48B wiring for operation.
load current. Complying with standard IEC 62053-21.
now and the data communications state.
password protection, communication agreement complying with standard DL/T645-1997.
imp/kWh (can select), Complying with standard IEC 62053-31 and DIN 43864.
select the data which displayed. The decimal median which displayed can choose set one or two.
electricity data for 12 months. The data can be kept forever after power cut off.
May select single tariff function in weekend. (Please specified when ordering)
themselves.