DEM031BL SINGLE PHASE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER
Port: Shanghai or Ningbo
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Week
Payment Terms: L/C,Western Union,MoneyGram
Contact SupplierPackaging Detail: Export standard package
Delivery Detail: 20Days
Functions and features |
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves. 2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993. 3. Have two tariffs, and port of set the tariff, input control voltage 0-90 Vac, set up tariff F1, input control voltage 150-400 Vac, set up tariff F2, the tariff conversion is controlled by timer outside or similar equipment. 4. May select cycle display (default) or push the button itemized display, it can display 6 data at most. Can select the data which displayed. The decimal median which displayed can choose set one or two. 5. Use memory that is not loss easy, the data can be kept forever after blackout. 6. A port of pulse output passive (polarity), complying with standard IEC 62053-31. 7. There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter, communication agreement complying with standard DL/T645-1997. 8. Six LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just now and the data communications state. 9. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21. 10. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is BN) and PT & CT (Product Configuration code is BP) for operation. 11. Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is BM). |
Technical parameters
Model | Accuracy | Reference voltage (V) | Current specifications (A) | Starting current (A) | Insulation performance |
DEM031BL | Class 1 | 127 230 | 5(30) 10(50) 20(100) | 0.02 0.04 0.08 | AC voltage 4kV for 1 minute, 1.2/50us waveform impulse voltage 6kV |
Outer and mount dimension
Wiring diagram (Type S)
Terminal | Note |
L | Phase line |
N | Neutral line(Inlet from bottom, outlet from top) |
5 and 6 | Port of set the tariff |
3 and 4 | Port of pulse output passive |
1 and 2 | Port of RS485 data communication |