Specifications and Product Details:

Description of Hardness Tester NOVOTEST T-D2

Portable hardness tester NOVOTEST T-D2 is designed for rapid non-destructive testing of hardness:

metals and alloys on standardized CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with five additional scales for calibration;
use of the scale of tensile strength (Rm) for determining the tensile strength of carbon steel products pearlitic by automatically converting from the scale of hardness Brinell (HB);

Implements method bounce (the method of Leeb).

The advantages of portable hardness tester NOVOTEST T-D2:

measuring the hardness of materials with heterogeneous, coarse-grained structure, forged products, castings, cast iron, large products
high performance and speed of measurement of hardness
lower (compared to ultrazukovym hardness) value

wide range of hardness
convenience and ease of measurement
minimum number of controls
large graphic display with bright backlighting
Automatic recognition of sensor
indication of the type connected sensor
control of the battery
extended temperature range (frost, down to -20 degrees Celsius LED)
presence of internal memory and a communication channel with PC
new, intuitive menu with tips on the buttons

Specifications of portable hardness tester NOVOTEST T-D2

Range of hardness HRC, HRC Brinell, HB Vickers, HV temporary resistance (tensile strength), MPa	20 - 70 90 - 450 230 - 940 370 - 1740
The basic error of measurement:	+ / - 2 units. HRC; + / - 10ed. HB
Overall dimensions, mm	122h65h23
Operating temperature range, ° C	-20 to +40
Food	2 AA batteries
Time of continuous work hours, not less	20
Weight of electronic unit with battery, no more, kg	0.2

Restrictions on the use of dynamic hardness tester NOVOTEST T-D2

Measurement items weighing less than 3 kg and a thickness of less than 12 mm is possible only when the following conditions:

product must be kept tightly stoppered to the surface of the base plate weighing not less than 5 kg.

In the measurement of magnetic steels error may increase because of the influence of a magnetic field have on the reading speed of the striker inside the coil.

Standart set of portable hardness tester NOVOTEST T-D2