KVCF Differential Flow Transducer can be used to measure flow of fluid, such as two-phase medium (moisture, condensate, etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil, etc) and so on.
Technical Features:
- Low installation requirement: 0~3D for upstream and 0~1D for downstream
- Turndown ratio: 10:1
- Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same β
- Abrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing out
- No block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulate
- Excellent repeatability: the V-cone primary element exhibits excellent repeatability of + 0.1%
- Long term stability: β ratio with no change for long term provide high accuracy for long time
- Signal stability: signal fluctuation is 1/10 of that of orifice plate
- High accuracy: + 0.5%
Technical Specifications:
- Accuracy: ±0.5%
- Repeatability: ±0.1%
- Rated Pressure: ≤16MPa, Maximum ≤42MPa
- Operating Temperature: -40 ~ 700oC
- Ambient: -40 ~ 65oC
- Installation Requirement: 0 ~ 3D for upstream, 0~1D for downstream
- Turndown Ratio: 10:1
- Medium: Gas / Liquid / Steam
- Structure type: Pipe Flanged / Directly welded / Square Pipe
- Material: Kinds of metal
- Flange Standard: As required