Isolation hart temperature head transmitter MS183 - MS183

Isolation hart temperature head transmitter MS183

Performance

• Universal settings with HART® -protocol
• Operation, visualisation and maintenance via PC
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit
• Explosion-proof Certification
• Galvanic isolation
• Output simulation (high selector, average value or D-value) or digit
• Customer specific measurement range setting

Application area

• Temperature head transmitter with 2 input channels and HART® -protocol for converting various input signals into a standard 4 to 20 mA analog (high selector, average value or D-value) signal or 2-way digtal output signals
• Dual-input: RTD,TC,Ohm,mV
• HART® -protocol for front end unit or panel unit operation using the hand operating module (MS275, MS375,PDA N800,PDA S900) or PC

Technical Characteristics

Programmable...................Use PC or the hand operator

Measuring range....................Set via PC or by the hand operator

Cold junction accuracy.................. ±1°C(TC)

Max-load.................................(V -16V)/0.025A(Current output )

Limit current........................≤25mA

Response time..............1s

Alarm signal.................Underranging linear drop to3.8 mA

Overranging linear rise to 20.5 mA

Sensor break or short-circuit: ≤3.6mA or ≥21.0mA

Automatic switching while sensor damaged

Temperature drift........0.01% FS/1°C

Long-term stability...........≤0.1°C per year or 0.05 %per year

Electrical connection

Wiring