DRK137 Anti- pressure steam boiler tester
The tester is suitable for the steam test of food packaging and other correlative films .It is also the optimal equipment for axenic packaging test.
Working principle:
Adopt the electricity heating method, heat directly after in pouring the water , produce the high pressure steam needed to steam the specimen, to compress the air from the outside after steaming, the temperature of the specimen will decline to 30~40°C, after quick-deep freezing hydraulic pressure for 3 minutes.
Character:
It can do operations: poach and quick-deep freezing anti-pressure steam;set up over loading protection of the heater and warning buzzer when the test finished;set up two safety valves,when steam pressure is over 0.25MPa, it release itself;when the inner temperature is up to 140°C,the power cuts off automatically.
Main fixtures:
mainframe,shelf,sampling clamp,plastic drainpipe wire,plastic pipe and etc.
Technical parameters:
·Hydraulic pressure:0.15MPa-0.25MPa (must)
·Air pressure: 0.25MPa constant (must)
·Effective cubage: 25L(270mm×430mm)
·Dimension ofclapboard: 275mm×190mm×20mm
·Temperature of steaming: 101°C~135°C
·Temperature of water: ≤100°C
·Time: 0~99minutes
·Relative humidity: ≤80%·Power: AC220V±22V,50Hz±1Hz(ground power pre-requisite)
·Dimension: 650mm×350mm×500mm(25L)
For more information, pls view our web http://www.drktest.com
or contact me ketty 13153144576
jinan drick instruments co.,ltd