1. It is used to determine asphalt by burning method.
2. Low cost per test.
3. Faster than solvent method.
4. Easy to use.
Port: Ningbo, Shanghai, Negotiable
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,Negotiable
Contact SupplierPackaging Detail: 1. Inner package: dust-proof plastic bag 2. Outer package: standard export wooden case with pallet 3. Special packages: according to buyer's requirements 4. The packages suitable for international transport by sea, by air or any other delivery methods
Delivery Detail: Within 15 working days and according to the ordering quantity
ACT-1 Asphalt Content Tester (Ignition Method)
1. Features
a. Low cost per test
b. Faster than solvent method
c. Environment friendly
d. Safer than the solvent method
e. Easy to use
Large screen
Standard methods built-in
On-screen prompts guide the user
f. Easy and quick to clean
2. Specifications
a. It is used to determine asphalt by ignition method.
b. Burning furnace is made of aerospace insulation material, the warm-up time is short, fast heating, within 20 minutes to a standard operating temperature 538 °C. Compared with the similar products, the testing time is saved significantly.
c. The insulation is good, when the temperature inside the furance is up to the standard working temperature the temperature outside the furance is lower than 45°C, high safety operation and effectively avoid the effect of the high temperature on the precision of the electronic scale.
d. The firebox have second combustion function, and high temperature filtration, exhaust systems, ensure the emission meet the environmental protection requirements.
e. The instrument will work automatically and easy to operate, the user just to input the weight of the sample and the calibration coefficients, place the sample and press the working button. In the end of the test, it will print the data automatically.
f. The software is powerful, it can display the content of asphalt, bitumen-aggregate ratio, lost weight of the sample.
3. The main technical parameters
Max.weight of specimen | 4500g |
Commendatory weight of specimen | 1000-1500g |
Precision of balance | 0.1g, |
capacity of balance | 10kg |
Firebox size | 350×440×330mm |
Max.working temperature of firebox | 800°C |
Standard working temperature | 538°C |
Test precision of the asphalt content | 0.1% |
Testing time | 20~30 mins |
Power supply | Working voltage 380V±10% , three-phase (star), the current is not greater than 20A |
Weight | 220KG |
Outside size | 800×800×1200mm |
Power | 6KW |
Ambient temperature : | ≤35°C |
Relative humidity | ≤85% |
4. Welcome to visit our site: http://www.chinageotest.com