*Cross Cut Adhesion Tester
*ISO/DIN 2409, ASTM D3359 Compliant
*Available in 1mm & 2mm blades
*Comes as a complete kit
Minimum Order Quantity: 1 Unit/Units
Contact Supplier
The Cross Hatch Cutter is used to measure the adhesion of coatings on substrates. By drawing a multi-bladed cross hatch cutter across the surface coating, a lattice pattern of squares is produced. Special adhesive tape is applied over the lattice pattern and pulled off. The amount of surface coating removed indicates a pass or fail as per the ASTM/ISO Standards.
These kits comprise of: a cross hatch cutter, an illuminated magnifying glass, a brush and roll of adhesive tape, all in a carry case.
Part Number
T01-00015 Cross Hatch Cutter 1mm
T01-00020 Cross Hatch Cutter 2mm
T01-00075 Cross Cut Tester
Range
T01-00015 Cross Hatch Cutter 1mm - for use on coatings up to 60 µm on hard substrates. Adhesion tapes with adhesion to steel rate of 4.3 Newtons/cm to 7.6 Newtons per cm.
T01-00020 Cross Hatch Cutter 2mm - for use on coatings from 61 µm to 120 µm on both hard and soft substrates. Adhesion tapes with adhesion to steel rate of 4.3 Newtons/cm to 7.6 Newtons per cm.
T01-00075 Cross Cut Tester - For use on coatings up to 50 µm
Resolution
T01-00015 Cross Hatch Cutter 6 teeth at 1mm spacing blade
T01-00020 Cross Hatch Cutter 6 teeth at 2mm spacing blade
T01-00075 Cross Cut Tester 11 teeth at 1mm spacing blade
Standards
ISO/DIN 2409, ASTM D3359
Features and Benefits
Includes a soft handle grip and a choice of adhesions tapes, with a range of cutter sizes for different tests.
Also has illuminated magnifier and allen key to change blades.
Dimensions and Weights (packed)
28 x 30 x 8 cm / 0.95 kg
Available for purchase online http://www.testtwo.com/acatalog/adhesion.html