PHscan30 Digital pH Meter - PHscan30

PHscan30 digital pH meter used for measuring the acidity or alkalinity of liquids, the meter is designed for outdoor applications, especially waste water treatment and environmental monitoring. PHscan30 waterproof pH meter has automatic temperature compensation function.

Automatic Calibration:
PHscan30 pH meter allows up to three-point calibration. Press the CAL key and the display shows the standard buffer pH needed for calibration. Immerse the pH electrode into the calibration solution as indicated and press the CAL key. The meter is now automatically calibrated.

Hold Function:
During the measurement, hold function can momentarily freeze the reading on the display for easy viewing and recording.

Automatic Temperature Compensation:
PHscan30 meter with a temperature sensor, press the temperature key, the meter will shows current temperature values. Automatic Temperature Compensation provides highly accurate measurement over the entire pH ranges.

Replaceable Electrode:
Generally, the pH electrode's effective life is one year, if you use it more than above time, the measured value possible produceds offset, it will serious influence the measurement accuracy of tester. PHscan30 meter has a double-junction sensor, you can easily replace the new electrode.

Auto-Power Off:
The meter will automatically power down 8 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually.

Waterproof Feature:
O-ring seals on the screw-tight battery and sensor compartments prevent water damage even if fully immersed. The unit also

floats.

Specifications:
pH Range: 0.00 to 14.00pH
pH Accuracy: ±0.05pH
Temperature Range: 0 to 60°C
Temperature Accuracy: ±1°C

Temperature Compensation: 0 to 60°C, Automatic
Calibration Points: 2 points
pH Buffer Options: NIST (pH4.00/6.86/9.18) or USA (pH4.01/7.00/10.01)
Auto-Power Off: 8 minutes after last key pressed
Operating Temperature: 0 to 60°C

Power Requirements: 3×1.5V alkaline batteries
Battery Life: Approx. 150 hours
Dimensions: 180(L)×30(Dia.)mm
Weight: 85g

Meter Included:
Standard pH Buffers, Batteries
Optional Accessory: Carrying Case