1.Baume Hydrometer
2.high quality and accuracy
3.direct reading values
4.warranty 3 years
5.comptitive price and in stock
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: By standard export wooden case
Delivery Detail: Within 7 working days when receive 30% down payment
Hydrometer direct reading measurement values
Equipment discription:
The density meter using Archimedes principle of buoyancy, accurate, direct reading measurement values.
Rubber: density itself is one of the basic characteristics of rubber materials, manufactured products, as different, add the degree of polymer formulation and curing followed different. The density of it and the hardness, tensile strength, elongation, abrasion resistance, deformation distortion volume, rebound, oil immersed expansion ... and affected. So in addition to its own characteristics, the increase of sulfur after its density, the volume will be accompanied by increase the amount of sulfur and the vulcanization of the degree of change, its physical properties will be different. Therefore, sulfur in Canada before and after the rubber must be measured density values. In the network structure of rubber, sulfur cross-linking bond density, determines the degree of vulcanization of rubber.
Plastic: the synthetic polymer, monomer raw materials used to synthesize or condensation polymerization of the material. Plastics can be divided into thermosetting and thermoplastic second category.
Seal:the purpose is to prevent the leakage phenomenon. Seal products, oil seal products manufacturer will measure the volume of pre-soaked in heavy oil and heavy oil after soaking the volume. I. The detection of seal products is the volume expansion rate.
Standard:
The Hydrometer direct reading measurement values according to ASTM D792, GB / T 1033, JIS-K-6268, ISO 2781 standards
Applicable industry:
This Hydrometer direct reading measurement values for industry: rubber, plastic, glass, wire and cable, footwear, precious metals recycling industry, carbide, composites
Technical parameter:
Model | HZ-2711A | HZ-2711B | HZ-2711C |
Measurable range | 0.001~ 120g | 0.005g ~ 300g | 0.01~600g |
Test type | Solid, granular, thin film, floating body | ||
Test time | About 5 seconds | ||
Density range | Both >1,<1 | ||
Density accuracy | .0.001 g/cm3 | ||
Settings | Temperature compensation setting, the solution set of compensation | ||
Function | Direct display of density, volume | ||
Standard interface | RS-232 |
Standard accessories:
A: anti-floating frame B: particle-specific measuring tools