Sulfur Content of Dark Petroleum Products Tester;
With digital temperature controller;
GB/T 387 ASTM D1551;
North Dalian
Port: Dalian Port or other Port
Minimum Order Quantity: 1 Set/Sets Discussible
Supply Ability: 200 Set/Sets per Month Discussible
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,Discussible
Contact SupplierPackaging Detail: Treated wooden package, according to the request of export.
Delivery Detail: According to your request and the actual situation.
BF-30 Sulfur Content of Dark Petroleum Products Tester (Tubular Oven Method)
1. Performance and Characteristics
Digital temperature controller; automatic timing; two tubes.
2. Technical Parameters
Working power | AC 220V±10% 50HZ |
Input power | less than 2300W |
Heating power | 2200W |
Temperature control range | room temp. ~950°C |
Temperature control accuracy | ±2°C |
Speed of flowmeter | 60~600ml/min |
Thermocouple | K-type |
3. Applicable Standards
This instrument conforms to the standard of GB/T 387, ASTM D1551.
4. Scope
This instrument applies to the dark petroleum products having a sulfur content above 0.1%, such as lubricating oil, heavy-mass petroleum products, crude oil, petroleum coke, paraffin and sulfuric additives.
5. Structural Characteristics
BF-30 Sulfur Content of Dark Petroleum Products Tester (Tubular Oven Method) consists of resistance furnace, control box, air purifiers and other major components. Tubular furnace’s shell is made of white steel, which has the advantages of corrosion resistant, heat resistant, hard deformation, etc. The resistance wire is made of high quality iron-chromium wire, high temperature, long life, anti-aging and so on. The control box consists of a precision temperature controller, time meter, control switch, micro vacuum pump, reduced motor, relays, etc. Air purification consists of three washing cylinders having the capacity of not less than 250ml which is connected with the latex tube.