Product Features:
Accuracy: 0.3%
Range: 6 ranges Automatic and manual
High cost-performance
Competitive Price
Business Terms:
Port: Shanghai
Minimum Order Quantity: 5 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: T/T
Contact Supplier
Accuracy: 0.3%
Range: 6 ranges Automatic and manual
High cost-performance
Competitive Price
Port: Shanghai
Minimum Order Quantity: 5 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: Carton Package315mm(Width)*130mm(Height)*280mm(Depth)Net Weight: 2kg
Delivery Detail: 2 - 3 weeks
AT511 series adopt low current test, compatible HIOKI 3540, quite suitable for resistance test in condition of low power and factory inspection and product sorting with sorting function.
AT511M Digital Milli ohm Meter | |
SPECIFICATIONS | |
| Parameter | DC resistance |
| Accuracy | 0.3% |
| Measurement Range | 100μΩ~30kΩ |
| Signal Source | I - Max: < 100mA (micro current test, compatible HIOKI 3540) |
| Range | Automatic and manual |
| Speed | 3 times/second |
| Result Display | show |
| Max Reading | 3000 |
| Adjustment | Short-circuit Zero-Adjust for each range |
| Comparator | None |
| Beep | None |
| Method | Four-terminal measurement |
| Others | LED display |
| Applications | Small diameter coil (headset coil); resistance of sensor; Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
GENERAL FEATURES | |
| Power Supply | Voltage: 198V AC - 240V AC Frequency: 50Hz Power: Max 15VA |
| Dimension & Weight | 225mm (Width)x83.5mm (Height)x199mm (Depth) 2kg |
ORDERING INFORMATION | |
| Accessory | AT503: Kelvin clip |
Model No.:
Features: 1)Test Voltage: 0.5kV to 5.0 kV DC(Regulated)
2)Ripple < 0.1% rms
3)Resistance measurement Range: 0-2 GOhm, 20.0 GOhm
Model No.: SCD96-W
Features: panel meter
1.CCC CE approved
2.AC input and AC output
3.low price with high quality
Model No.: GDZC
Features: GDZC Series Transformer DC Resistance Tester to measure the DC resistance of inductance circuit
Model No.:
Features: 1)Power : 230V AC, 50Hz
2)Test Voltage: 0.5kV to 5.0 kV DC(Regulated)
3)Accuracy:V: 1percent of rdg ,5 dgt @ 100MOhm
Model No.: DZ
Features: Electrical Ruler
Expert in precision measurement for any linearity resistance.
Accuracy: 0.1% & 0.3% .
offset value settings.
Model No.: GDJY
Features: GDJY intelligent insulation resistance tester to conduct the insulation,absorption factor and polarization index test
Model No.: GDDW-III
Features: GDDW-III Ground Network Grounding Resistance Tester/ earth resistance tester / resistance meter
Model No.: DT-5302
Features: DT-5302 DMM with Kelvin small resistance measurement
1)Four terminal Kelvin measurement
2)Diode Check & Continuity Test
Model No.: DIM-571
Features: DIM 571 is a LCD insulation meter (M Ohm), Continuity (OHM) AC Voltage
2. Three Insulation test voltage
Model No.: DR
Features: Resistance Meter
Input:0-500M ohm--Megger ohm meter, 0-5k,0-100k,0-10M ohm--resistance/conductivity/position meter
0.3% F.S
Model No.: AE-780
Features: AE-780 Surface Resistance Meter:
-light weight, pocket-sized,auto ranging
-test conductive, anti-static and static dissipative
Model No.: E0804
Features: ESD Wrist Strap Monitor,
1.Pretty competitive price;
2.Hold high quality;
3.Short lead time;
4.Low MOQ.