Indoor humidity and temperature measurement
room humidity and temperature measurement
humidity and temperature transmitter
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western UnionContact Supplier
· Indoor Humidity and temperature transmitter
· Wide range of temperature probes
· 010V or 420mA measuring signals
· Compact size and modern design
· Indoor humidity measurement for comfort control
The transmitter measures the humidity by the honeywell humidity sensor HIH-3610. The transmitter analog output may be be 0-10V or 4-20mA. And the transmitter include a noise filter.the power suply is large range VDC18V----VDC30V.The humidity transmitter measurement range is 5%-95%.
Ordering number:RH-5U-R or RH-5U-R-T
-5 indicates the humidity transmitter accuracy is 5%; -3 indicates 3%, -2 indicates 2%.
-U indicates the humiditt transmitter signal out is 4-20mA or 0-10V optional.
-T indicates the humidity transmitter integration with temperature signal out.
The room humidity and temperature transmitter signal out is 4-20mA or 0-10V optional .Installation
Mount the humidity transmitter on a flat interior wall of the room to be controlled. Do avoid obstructions such as shelves, curtains and recesses. Do not place near heat sources, draft channels. Do not expose to direct sunlight.
· When installing the unit, fix the base plate first, connect the electrical connections then hook on the cover and secure it.
· The end of the conduit at the sensor must be sealed to prevent false measurements due to draughts through the conduit.
· Connect the wires according to the wiring diagram to the measuring circuit in the cover:
o If only humidity, the transmitter need three terminal connections,DC24V,Ground and humidity signal out.
o If humidity and temperature, the transmitter need four terminal connections, DC24V,Ground , humidity signal out and temperature signal out .
o The connection signal cable should be shield wires.
|Power Cunsumption||Max 2 VA|
|signal||4-20mA or 0-10V|
|Temperature range||0 50 °C|
|Sensing element||Capacitive Element:|
|Connection||Connection Terminals||2.5 mm2|
|To IEC 721-3-3|
class 3 K5
|Transport & Storage|
|To IEC 721-3-2 and IEC 721-3-1|
class 3 K3 and class 1 K3
|conform according to|
EMC Standard 89/336/EEC
EMEI Standard 73/23/EEC
EN 61 000-6-1/ EN 61 000-6-3
|Automatic electrical controls for household and similar use|
Special requirement on temperature dependent controls
|EN 60 730 1|
EN 60 730 2 - 9
|Pollution Class||Normal acc. To EN 60 730,RoHS compliant|
|Degree of Protection||IP56 to EN 60 529|
|Safety Class||III (IEC 60536)|
|Housing Materials||Cover & Mounting Plate||Fire proof ABS plastic|
|Dimensions [mm]||Cover: 42 x 112 x 88 (H x W x D)|
probe: ø 10 x 200 (Diameter x L)
|Weight (including package)||135g|