1. Upright metallurgical microscope 53X
2. Eyepiece:10(three)
3. Objective:4, 10, 40, 60
4. Magnification :100-1250times
Port: Qingdao or Tianjin
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Week
Payment Terms: T/T
Contact SupplierPackaging Detail: carton
Delivery Detail: 5 work days
Upright metallurgical microscope 53X
1. Characteristics
Upright microscope, except for the identification and analysis of various metal and alloy material structure, also can be used in integrated circuit and micro particles, wire, fiber, such as spraying the surface of some surface phenomenon research and analysis work.
Column type structure design, can arbitrarily set the barrel of the horizontal and vertical position, suitable for a variety of different types of sample and the environment.
Apparatus can use the camera or digital camera system, a variety of image processing by computer, edit, save and output ( such as printing ) or into the multimedia system and electronic mail.
The system can also choose microscopic image analysis computer operating system software, as follows:
1 metallographic image analysis system;
2 microscopic image analysis system;
3 microscopic image measurement system;
Eyepiece: flat field eyepiece10X /1812.5X /15 dia
10X flat field reticle eyepiece
Objective: achromatic objective4X 0.1015
10X 0.2511.4
A flat-field achromatic40X 0.650.30
Three order lens: can be equipped with camera, camera device
Total magnification coefficient 1X:40X-500X oblique cylinder
Coarse and fine focusing: regulation range15.5 mm fine tuning Jiao Ge value of 0.002mm
Glass table:120 mm maximum specimen height: about 90mm
Optional: long working distance objective25X / 0.4 40X / 0.65
Flat field achromatic objective25X,100X oil
Metallographic analysis software, mobile work bench
The 53XA configuration of lighting, lighting,53XB configuration on the movable work bench