ultra low temperature pressure transducer MPT221LT
Range: -1Bar-0-0.1Bar....2000Bar
Temperature range: -250c~~0-125c
Port: SHENZHEN
Minimum Order Quantity: 1 Piece/Pieces NA
Supply Ability: 500 Unit/Units per Month NA
Payment Terms: T/T,Western Union,PayPal
Contact Supplier
Packaging Detail: CTN
Delivery Detail: 7days
| MPT221LT Ultra low temperature transducer | |
| Picture ref | |
| integrated structure, built-in amplifier; measured medium temperature: -196 °C ~ 150 °C, Operating | |
| temperature: -40 ~ 105 °C; 2-wire 4-20mA current loop or 0-5VDC output | |
| Low-temperature scientific experiments, liquid oxygen, liquid nitrogen, liquid hydrogen, liquid helium | |
| Cooling tanks, cryogenic tanks, cryogenic propellants such as pressure measurement | |
| Aerospace, aviation, ships and other low temperature storage tanks | |
| Specification | |
| Medium | for 17-4PH ,15-5PH, 316L stainless steel non-corrosive gases and liquids |
| Pressure type | absolute pressure, gauge pressure ventilation, sealed reference table pressure |
| Work voltage | 5-15VDC(10VDC) / 9-36vdc |
| Signal output | 0-5vdc, 0-10vdc, 4-20mA |
| Zero output | ±5%FS (typical) |
| Full load output | 10mV,20mV,100mV option |
| Non linearly | 0.1%FS,0.2%FS |
| repeatability | 0.05%FS |
| Accuracy | normal temperature: 0.1% FS, 0.2% FS, 0.5% FS; low temperature: 0.5% FS% ~ 3% FS |
| Work temperature | -196°C~+125°C,-260°C/-350c(especial) |
| Thermal zero drift | 1 ~ 4% FS (full-temperature zone) |
| Hot full-scale drift | 1 ~ 4.5% FS (full-temperature zone) |
| Response frequency | > 1kHz or> 5kHz optional |
| Insulation resistance | ≥ 100MΩ/50V |
| Safety overload | 150% FS (1.5 times full scale) |
| Burst Pressure | 300% FS (3 times the full scale) |
| Vibration | 5 ~ 1000Hz, amplitude 2mm, X, Y, Z each to 30 minutes, the output changes less than 0.1% FS |
| Shock | 50g; X, Y, Z three-way, each to 20ms; output variation less than 0.1% FS |
| Connection | M3, M4, M5, M6, M8, M10, M12 × 1 or a designated |
| Wetted Materials | 15-5PH ,17-4PH, 316L stainless steel |
| Relative humidity | 95% RH |
| Protection class | IP65 or IP67 enclosure |
| Wire | Air plug and outlet, sealed lead directly |
Model No.: UPC9
Features: 1. Good long-term stability under high temperature;
2. working temperature reaches 200 degree c.
Model No.: UPX20-a
Features: 1. Based on silicon technology
2. Flush diaphragm structure, suitable for medical, food, beverage industry
Model No.: PT210C Standard Type
Features: Pressure sensor
Better performance,
reliable stability,
repeatability,Low cost
CE,ISO9001:2008,EX-Proof etc
Model No.: PT210C
Features: Pressure sensor
Better performance,
reliable stability,
repeatability,Low cost
CE,ISO9001:2008,EX-Proof etc
Model No.: TTG-E/K/J/PT100/PT1000
Features: Temperature Transducer
reliable stability,
repeatability,
Low cost
CE,ISO9001:2008,EX-Proof etc
Model No.: PT214 Flush Diaphragm Type
Features: Pressure sensor
Better performance,
reliable stability,
repeatability,Low cost
CE,ISO9001:2008,EX-Proof etc
Model No.: UPX7-a
Features: 1. Based on strain gauge technology
2. Wide ranges from 0~10bar to 0~3000bar
3. High accuracy 0.1%FS
Model No.: HY601
Features: Load Cell,
Small Volume,
better performance,
reliable stability, repeatability
Low cost
Model No.: UPC1
Features: 1.Based on MEMS technology;
2.-1~0bar..600bar, 0.1%FS, 0.25%FS, 0.5%FS;
3.High reliability, stainless steel construction.
Model No.: UPC7
Features: High measuring accuracy;
Suitable for middle and high pressure measuremen;
Based on strain gauge technology.
Model No.: UTB4
Features: 1. Temperature transmitter, high strength stainless steel housing
2. Explosive-proof Exd II BT4
3. Measuring range to 300*C
Model No.: UPX3351
Features: All-welded structure for differential pressure transmitter maufacturing, diaphragm material: 316L, Hustelloy-C, Monel, Tantalum