torsion testing machine
1.operation convenience
2.use widely
3.lowest price
4.maintain 3 years
Port: Yantian
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 200 Set/Sets per Month According to the requirement
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: By standard export wooden case
Delivery Detail: Within 20 days when get 30% down payment
torsion testing machine
Equipment summary:
For testing rubber insulated and sheathed of cables under dynamic load and after a certain number of bending, then view the damage level.
Main functions:
1, The test specimen type:2-core single-phase, three-core three-phase, four-core three-phase.
2,The test method:No-load, single-phase (2 core), three-phase (three-phase three-wire / three-phase four-wire) can be any choice.
3, Stopping method:A, may direct: O, R, S, T phase break; B, may direct:R / S, R / T, S / T, R / O, S / O, T / O short-circuit ; C, May direct: O, R, S, T and pulleys short-circuit.
corresponding standard:
According to IEC227-2,IEC245-2,VDE0472,GB5023.2,IEC60227-2(ed2)1997,IEC60245-2(ed2)1994+A1:1997,HD22.1,GB5023.2 and GB5013.2,UL1581
tenhnical parameter:
Model | HZ-4013A |
Torsion speed | 0.33m/s |
Torsion displacement | ≥1M |
Test current | 0~35A |
Test voltage | 2-core single-phase AC:0~250V/three-phase AC:0~450V(adjustable),50/60HZ |
Hammer | 0.5,1.0,2.0,3.0,7.0kg |
Pulley structure | two pulley structure |
Pulley diameter | φ60 φ80 φ120 φ160 φ200MM(alufer) |
Primary structure | using linear bearings and linear slide from Japan's NHK |