1. DIN rail mounting electric isolators/isolation
2. 4-wire
3. width: 12mm
4. input/output signal range: 4~20mA 0~20mA 1~5V
Port: Tianjin
Minimum Order Quantity: 5 Piece/Pieces
Supply Ability: 3000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: standard package
Delivery Detail: 4 weeks
R5C series intelligent digital analogue isolators, which are used for industrial automation system, transform analog signal outputted from four-wire system instrument in industrial field into DCS/PLC by isolation. It realized the matching of signal types, signal amplification, isolation and antiinterference, etc. between industrial on-site instruments and DCS/PLC. The input and output signals of products in this series can change ranges through software,adjust through digitization, automatically
dynamic calibration offset, automatically cover temperature drift and other functions. This product contains one in-one out, one-in two-out, two in-two out a variety of combination forms. Width of the shell is only 12mm, which satisfies the high-density requirements of on-site installation.
General specifications | |
| Construction | Ultra-thin terminal connection |
| Connect | Phoenix terminals with M3 screw |
| Wire diameter | 0.2-2.5mm2 |
| Tightening | 0.5-0.6Nm |
| Housing material | Fire resin |
| Protection grade | IP20 |
| Mounting | EN60715 standard symmetrical 35mm DIN rail |
| Dimensions | W12 x H95 x D110 mm |
| Weight | About 100g |
Input signal specifications | |
| Input signal range | 4~20mA,0~20mA,1~5V,0~5V,0~10V etc. Input signal types |
| Input resistance | Current signal input: ≤60W |
| Current signal input: ≥500KW | |
| Absolute maximum input | Electric current signal: ≤200mA (with over-current protection) |
| Current signal: ≤30V (with over-voltage protection) | |
Output signal specifications | |
| Output signal range | 4~20mA,0~20mA,1~5V,0~5V,0~10VThe output signal types |
| Output signal resistance | 0/4~20mA output: 0~550W (with short circuit protection) |
| 0~10mA output: 0~1100W (with short circuit protection) | |
| 0/1~5V output: ≥500KW (with short circuit protection) | |
| 0~10V output: ≥1MW (with short circuit protection) | |
Typical application:
Ø Field existing grounding potential difference.
Ø Field existing heavy electromagnetic interference.
Ø Protecting DCS or PLC system.
Ø Signal need to be distributed in two roads.
If you have any further queries, please feel free to contact with us.
Model No.: UTG9002C
Features: UNI-T UTG9002C Function Signal Generator
Range:0.2Hz to 2MHz
Waveforms:Sine, Square, Triangle, Ramp, Pulse, TTL
Good quality
Model No.: ATF15B
Features: ATTEN ATF15B DDS Function Generator
40mHz~15MHz
3.5-inch TFT LCD display
32 kinds of standard or build-in fixed waveforms
Model No.: VLP--300
Features: Fiber-optic fault detector
1. CE, FCC,ROHS certification
2. Fiber jumper, patch panel or connector fault
3. Fiber identify
Model No.: MP1212E
Features: MP1212E Audio Sweep Generator
*Base on novel RC oscillated technique,tiny sine distortion ,especially suitable for speaker
Model No.: VLP--300
Features: Visual fault locator
1. LD light source
2. Detect long distance
3. Stable power output
4. CE, FCC, ROHS
Model No.: VLP--300
Features: Fiber-optic fault detector
1. Fiber jumper, patch panel or connector etc. fault
2. Fiber fracture, bending fault location
Model No.: VLP--300
Features: Fiber-optic test fault detector
1. 650nm wavelength
2. LD light source
3. Detect long distance
4. Fiber idenfication
Model No.: VLP--300
Features: fiber-optic fault detection
1. LD light source
2. Detect long distance
3. Fiber identification port to port
4. Pentype
Model No.: VLP--300
Features: Fiber-optic test fault detector
1. Detect long distance
2. LD light source
3. Fiber identification port to port
4. CE, FCC
Model No.: VLP--300
Features: Visual fault locatior
1. 650nm wavelength
2. Fiber fracture,bending fault location
3. Fiber jumper, patch panel or conncetor
Model No.: VLP--300
Features: Visual fault tester
1.LD light source
2.Fiber jumper, patch panel or connector fault
3.OTDR blind district check the fault
Model No.: VLP--300
Features: Visual fault locator
1. Fiber fracture, bending fault location
2. Fiber identification
3. Fiber jumper, patch panel fault