cenment compression testing machine
1.Full-automatic,load 3000KN
2.high quality
3.for building materials
4.3 years warranty
Port: Yantian,shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 300 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: by standard export wooden case
Delivery Detail: within 20 working days after get 30% advance payment
professional cenment compression testing machine
Introduction:
This professional cenment compression testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test,also used to test the compressive performance of other materials.
Spatial adjustment method:Electric lift
Hydraulic System:
The hydraulic oil tank driven by high-compression pump into the motor oil, flows through the unidirectional valve, high pressure filter, pressure valve, servo valve, into the cylinder.Computer control signals to the servo valve,Control direction and opening of the servo valve ,to control the flow into the cylinder,achieve constant test force control.
Control system:
System including digital servo valve, high-precision sensors, controllers and software, high control precision and reliability.Meet GB, ISO, ASTM and other standards for cement, mortar, concrete and other materials testing requirements.
System has the following functions:
1. Closed-loop control with force;
2. Can achieved constant loading rate or constant stress loading rate;
3. Adopt computer for electronic measurement, automatic test;
4. Computer automatically calculates the results and print reports.(picture 1 picture 2)
5. Test reports can be to self-design and exported to Excel
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Main performance technical specifications:
Max load | 2000kN | 3000kN |
Test force measuring range | 4%-100%FS | |
Test Force showed the relative error | ≤indicating value±1% | <±1% |
Test Force Resolution | 0.03kN | 0.03kN |
Hydraulic pump rated pressure | 40MPa | |
Upper and lower bearing plate size | 370×370mm | 500×500mm |
Maximum distance between the upper and lower plate | 330mm | 500mm |
Piston diameter | φ250mm | φ310mm |
Piston stroke | 50mm | 100mm |
Motor Power | 0.77 kW | 1.1kW |
Outside dimension (l*w*h) | 640×720×1500 mm | 780×720×1950 mm |
Weight | 2000kg | 2500kg |
Picture 1 The main interface Picture 2 Interface test report