4.Calibration:2 points: Zero set, slope set
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 500 Unit/Units per Month
Payment Terms: T/TContact Supplier
Packaging Detail: 1 unit in single wooden case.
Delivery Detail: 1-2 weeks after receive payment
DMA110 industrial PH meter / ORP meter / PH controller
DMA110 series pH / ORP intelligent analyzer is coupled with powerful and stable industrial microprocessor. It’s strong anti-interference and simple maintenance. DMA110 can connect with various types of electrodes and then can be widely used in water treatment, chemical industrial process, paper industry and food industry. The built-in dot matrix LCD can display pH values, mV value, temperature, alarm settings and time. Configuration menu is simple and flexible, easy for operation.
DMA110 can be connected with digital smart electrode which made by DAMING INSTRUMENT, to achieve full digital detection and communication. Digital smart electrode build-in patented chip, can be pre-calibrated to plug and play on industrial site. Because of digital communications between DMA110 analyzer and the smart electrode, the anti-jamming ability of DMA110 analyzer is much better than the conventional pH/ORP analyzer. It’s especially suitable for serious industrial scene with strong interference.
DMA110 analyzer parameters
|Power supply||100 ~ 240 VAC 50/60Hz.|
|Input sensor signal||Single electrode input, 3 kinds of input signal:|
l 2 wire digital input (when use DMA110 supported smart electrode).
l 2 wire analog input (no temperature compensation).
l 4 wire analog input (include 2 wire temperature compensation).
|Measurement range||0.00 ~ 14.00pH, -1999mV~+1999mV,-30°C~130°C.|
|Display information||pH / ORP (mV), pH mV, temperature, proportion of 4~20mA output.|
|Transmission signal||4 to 20mA isolated output.|
|Alarm output||2 separate relay output: H, L|
|pH ORP Accuracy||0.03pH, 2mV|
|Highlight||Smart electrode utilize digital communication, distance beyond 1000m. Strong anti interference. Pre-calibration, lifespan auto detect.|
Composite glass PH electrode parameters
|Sensor film type||General type, low resistant type (option), Alkali-proof type (option)|
|Salt bridge type||TEFLON, Ceramics (option)|
|Integrated temperature sensor (Option)||Pt100, Pt1000, 10K, 2.252K|
|Jacket material||PPS (polyphenylene sulfide)|
|Jacket connection dimension||Cable, 3/4 BSP” thread, or others.|