pen type conductivity electrode - FAST-TM-03CP

electrode manufacturing and supplier;
competitive price,good quality and excellent service
CE approval

FEATURE:

l Pocket& lightweight -- it is very lightweight and portable conductivity so far, only weight 32g;

l Long life battery – use 2 pieces of CR1625-3V batteries which can last 2 years;

l Big LCD display – three and a half LCD display, clear indicated value, it can read numbers directly;

l Easy to use –it can insert to water bottle to measure, and also pen cap can be use as measured container;

l Fast measuring speed -- use precision and nude sensing element, and finish a measure in 5-30 seconds;

l Easy cleaning -- electrode sheath can pull out, so as to clean probe and sheath;

l Automatic conversion – it has temperature compensation element, when temperature reaches to 25°C,indicate TDS value automatically.

OPERATION FOR USE:

l Pulled out cap;

â Switch on: touch" ON / OFF" button on top;

â Measurement: electrode probe is immersed in water over electrode sheath;

â Readings: waving gently, read it when indicated value is steady;

â Shutdown: press "ON / OFF" button on top;

â Cleaning: after cleaning the electrode probe, throw off residual water;

l Pull on cap.

TECHNICAL PARAMETERS:

l Measuring range : 0 ~ 1999 μs/cm

l Resolution : 1 μs/cm

l Working temperature : 0 ~ 50°C

l Relative humidity :<85%

l Precision: ±2% ( F.S )

l Weight : 32g

l Shape size : 129 X 26 X 16 ( mm )

l Battery : CR1625 3V X 2

RANGE OF APPLICATION:

l Pure water,plating solution,ionized water,aquiculture,foods and drinks,boiler water,home &office,municipal water supply,well water/river water,laboratory,swimming pool water,travel/health care.

CAUTIONS:

l The surface of probe must not be cleaned and touched by hand, so as not to affect accuracy of test;

l It is not advisable to pull off electrode sheath to measure, so as not to affect deviation of indicated value;

l In order to ensure the testing accuracy, do not be automatically adjusted;

l if the indicated value appears unnormal phenomemons,such as big error or waved or nonreturn to zero,etc. first put electrode into alcohol, shaking a few seconds, and quickly take it out of level, in addition to check the battery voltage, if lower than 4.5V, timely replace of batteries(under condition of low temperature and humidity, if indicated value cannot return to zero, it don’t affect measured value in range of 002);

l The replacement of the battery should pay attention to positive and negative polarity ( the attention to battery spring plate " +" ).

APPLICATIONS:

l Cond. means "conductivity”, the unit is μs/cm;

l Conductivity is the smaller, the higher is purity of water;

l After the pure water and mineral water setting for a long time, conductivity value rise too much, at this time do not drink, so as not to affect health;

l Water dispenser should be often measured conductivity value;

l The fruit, vegetables, fans and other food are put in the cup with pure water, when measuring that conductivity value is high, be suspected of pollution, so pay attention to it;

l It is in the process of swimming, water pool cleaning can be measured, when change of indicated value is too large, so pay attention to it;

l The conductivity value of pure alcohol is 0, if more than 0,means impure;

l Each city, different regions, due to different pipeline and water, there is different conductivity values;

l The flower foods is mixed according to proportion, and measures conductivity value, the value will be convenient for future direct mixtion;

l Measuring conductivity value of aquarium water, if the value rises too much, timely change the water;

l Water of fish tank is measured conductivity, we can know cleanness, if the number value is high, pls replace of water;

l For national pure water standard, conductivity value is 10 μs/cm, which is equivalent to TDS is 5mg/L.