pH probes
Port: JNPT Navi Mumbai
Minimum Order Quantity: 1 Unit/Units As Per Order
Supply Ability: 100 Unit/Units per Week As Per Order
Payment Terms: T/T
Contact SupplierPackaging Detail: Export Quality Packing
Delivery Detail: 2 Week
Electrodes
Contech offers wide range of electro chemical sensors for the measurement of pH, ORP, Conductivity, DO, different Ion Concentration and Temperature. Choosing a right electrode for the specific requirement is important and the following to be considered while deciding an electrode for the measurement: accuracy of measurement, electrode body, reference construction and junction. Electrodes need to be calibrated with standards for achieving proper results. Electrodes should be stirred and maintained as per the instructions to enhance the performance and life.
Electrode | Model | Specifications | Details | Application |
pH combination - Plastic | EpHP01 | Plastic housing, Ceramic Junction, 0~80oC Temp. range, BNC : Connector Size: 12 Ø x160 mm | Retention of accuracy for continuous measurement | General lab application. Not suitable for high alkaline chemicals (pH>12) |
pH combination with built in temperature sensor | EpHP02 | Plastic housing, Ceramic Junction, 0~80oC Temp. range, BNC(pH) + Ø3.5mm, 2 cores(temp) Connector, Size: 12 Ø x160 mm | Retention of accuracy for continuous measurement ,collision resistant | Simultaneous measurement of pH & temp & automatic temp. correction |
pH combination -Glass | EpHG03 | Glass housing 0~90oC Temp range, glass ground joint junction, BNC Connector, Size:12 Ø x160 mm | For high accuracy measurement | Suitable for low ionic strength or high viscosity solvents, ideal for colloidal or feculent solvents |
Conductivity | ECNG-01 | 0.5 µS / cm – 200µS /cm range, 1.0+0.2 cm-1constant, BNC Connector, Size:12 Ø x155mm, 5x7mm Pt plate sensitive element (coated with Pt black) | Cavity structure high precision and better repeatability | High precision conductivity measurement in lab |
Temperature Sensor | ETS-01 | -10 ~ 110oC, 5 Ø x 145mm, Customized Conn | Stainless steel material, Platinum resistor Pt-100 | High precision temperature measurement |
Dissolved Oxygen With built in temperature sensor | EDO-01 | Polarographic, Size:15 Ø x180mm, polarization time : 3~5 mins Mini round shell connector | Easily removable diaphragm cap. Set Consists of DO membrane, Inner solution, cathode polish paper | Measurement of dissolved oxygen with built in air pressure compensation & salinity correction |
ORP Combination Plastic | EORP-01 | Plastic housing, Ceramic junction, BNC : Connector, Sensitive element : 1mm Ø x 5mm Pt pin, Size:12 Ø x160 mm | Plastic housing, No KCL refilling requirement | Common solution and waste water |