moisture tester
1.rapid detection and intelligentize operation
2.drying specimen quickly and equably
Port: SHENZHEN
Minimum Order Quantity: 1 Set/Sets OEM service offered
Supply Ability: 50 Set/Sets per Month OEM service offered
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: strong wooden case
Delivery Detail: 15 days after order
Moisture tester
This halogen moisture tester is used to test moisture of all kinds of materials.
This machine adopts heat gravimetric analysis principle:
this machine tests specimen weight (including water) when start the test.
Then, turn on the halogen heating and drying device built in the instrument to heat and dry tested specimen.
In the process of the drying, the instrument tests weight of the specimen successively and displays lost moisture.
After finish the test, the instrument can display moisture weight of the specimen or dried material weight as the last test result.
In the practical use, the most important factor is heating and drying speed.
Compared to common infrared heating or drying oven method, needed time that use halogen to heat to reach maximum heating power is shorter.
At the same time, this instrument can also use high temperature which is other factor to shorten drying time. So it can increase efficiency of moisture measurement.
The main features
1. It adopts orbicular halogen heater
2. rapid detection and intelligentize operation
3.drying specimen quickly and equably
4.can storage various of moisture determination methods
5.the standard interface can be linked to the peripheral equipment
Moisture tester
Main technical parameters:
|