medical mammography film

Specification
1) 5in x 7in, 18cm x 24cm, 24cm x 30cm, etc.
2) Special specifications available according to customers' requirements.

This film is a general film with blue polyester bases, the obverse side coated with sensitive emulsion and the reverse side with a halation layer.

It is designed for mammography and soft tissue diagnostic radiography. It features abundant graduation and high definition.

Handling :

The film should be handled carefully by the edges to avoid physical strains.

The best conditions of usage should be: temperature:18-24°C ,humidity :50%RH-65%RH.

Hands must be clean, dry and free of lotions ,etc.

Film Processing:

This film is designed for 90-seconds automated processing or manual processing.

The former is recommended with any kinds of film processor, developing at 30-35°C in 23s.

In manual processing ,the film should be developed in temperature 20°C for 5 minutes, fixed in 5-8 minutes, washed for 10-30 minutes and dried.

Safelight:

Use a safelight filter (dark red) in a suitable safelight lamp equipped with a 15-watt bulb.

Keep the film at least 4 feet (1.2 meters) from the safelight, and the total lighting time is in 10 minutes..

Storage:

Store in a cool, dry place (The suitable temperature is 10-20°C, the humidity is 30%RH-60%RH).

Keep it away from dampness, high temperature, any bad effective gases, x-ray, gamma ray or any other penetrating rays.

Stored vertically to avoid any harmful effect caused by pressure.