BOOCCA electromagnetic flow meter, a high reliability and precision product undergone continuous improvement, which reach the most advantage level in excitation, liner and intelligentization technique, have been widely used in measuring the volume flow rate, such as acid, alkali, saline solution, slurry, pulp and wastewater, solid-liquid two phase media etc.Each meter is also provided with a 4-20mA analog output and a built-in local display.
Features:
1.High accuracy: ±0.5% or ±1.0% as normal, ±0.25% under special calculation. The measurement result has nothing to do with the liquid pressure, temperature, density, conductivity (no less than the lowest limit) and some other parameters.
2. Repeatability: ±0.5% or ±1.0% as normal
3. No part wear and tear, so there is no extra pressure loss, the effort of saving energy is observable.
4. High anti-clogging performance, especially apply to measuring the solid-liquid two phases medium, such as wastewater, slurry and paper pulp.
5. Short upstream straight run is required. As the inductive signal exists in the whole magnetic field, it can be regarded as the average value of the cross section of the pipe.
6. Super anti-abrasion and corrosion-proof. Just the liner of the pipe and electrode surface contact with the liquid, so you just need to choose right material for liner and electrode.
7. The inductive voltage signal is precise proportional to the average velocity.
Structure features
1. Quick respondence and good stability.
3. Double-cavity structure separates the electronic part from the wire connection terminal.
4. Super low EMI switch power source, suitable for wide range of power voltage.
5. High-definition background-light and extended-temperature LCD displayer, easy to operate.
6. Support bus digital communication output, RS485, RS232C, HART, BRAIN, MODBUS etc.
7. Measure and accumulate the flow rate of bidirectional fluid