Diameter: 10-2200mm
Ambient Temperature: -4 to 140 degree (-20 to 60 degree)
Accuracy: 0.5% accuracy of rate from 0.5-10 m/s
Port: FOBTianjin/CIF/CNF
Minimum Order Quantity: 1 Set/Sets depends on your request
Supply Ability: 175 Set/Sets per Month maybe earlier
Payment Terms: T/T
Contact SupplierPackaging Detail: Carton
Delivery Detail: 3-20DAYS
Diameter: 10-2200mm
Combination: S. Integrated type
L. Remote type
Electrode Material: M. Stainless steel 316
T.Ti
D.Ta
H. Hastelloy alloy
P.Pt
N.Ni
Electrode Materials:
Standard: 316 Stainless Steel
Optional: Conduct Factory
Liner Material: PTFE, FEP (Rubber)
Fluid Temperature: PTFE: 100°C Standard (Customized: 180°C)
FEP: 60°C
Pressure Limits:
1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa
Coil Power: Pulsed DC
Pipe Spool Material: 316 Stainless Steel
Meter Housing Material:
Carbon Steel welded
Flanges:
Carbon Steel - Standard (ISO 7005-1)
316 Stainless Steel - Optional
Optional Stainless Steel Grounding Ring
Features and benefits
No moving parts; Virtually no pressure drop; Minimal maintenance
Wide range of nominal diameters;
Broad selection of lining and electrode materials
Applications for magnetic flowmeters are:
Monitoring and control of a variety of industrial effluents
Paper pulp waste
Mining slurries
Brine
Liquid food products
Detergents
Waste sludge in sewage treatment plants and water and waste industries.
Corrosive acids
Solid bearing fluids
Electrolytes
Process chemical
Advantages for magnetic flow meters
Non obtrusive flow in full-bore models
No moving parts
Virtually no pressure drop
Insensitivity to viscosity, specific gravity, temperature and pressure (within certain limitations)
Will work with laminar, turbulent, and transitional flows
Can respond well to fast changing flows (for high-frequency DC pulse and AC excitation designs only)
Good accuracy (0.5 to 1%)Can handle slurries and heavy particulates
Lining protectors available for harsh, chemically corrosive, and abrasive fluids
Power Supply: 85-265Vac (Optional: 18-36 Vdc)
Power Consumption: 10W
Accuracy:
± 0.5% accuracy of rate from 0.5-10 m/s
± 1.0% accuracy of rate from 0.1-0.5 m/s
Repeatability: 0.2%
Minimum Fluid Conductivity:
5.0 micromhos/cm
Flow Direction: Unidirectional or bidirectional, 2 separate totalizers (programmable)
Analog Outputs: 4-20mA, 500ohms Max Load
Output Frequency: Scaled Pulse output, (open collector) Max 5Khz
Noise Damping: Programmable
Pulse Width: Programmable up to 500ms
Zero-point Stability: Automatic correction
Ambient Temperature: -4 to 140° F (-20 to 60° C)