industrial accelerometer
1.Calibration Data supplied with each unit.
2.Typical Test Data
3.Design Values
Port: CHENNAI
Minimum Order Quantity: 1 Piece/Pieces NOS
Supply Ability: 10 Piece/Pieces per Month
Payment Terms: L/C
Contact SupplierPackaging Detail: WOODEN PACKING
Delivery Detail: 2 TO 4 WEEKS
industrial accelerometer
Model No. | PG 101 M0 |
Charge Sensitivity (pc/g) * | 40-55 |
Capacitance (pf) * | 1100 ± 20% |
Resonance frequency (khz) ** (Electrical excitation method) | 9.5 |
Frequency range (6%) Hz ** | 5 to 2000 |
Accuracy | ± 10% |
Dynamic range-sine g’s *** | 200 |
Shock Max. g’s *** | 500 |
Max. Operating temp °C ** | 60 |
Leakage Resistance 30 °C * | >10 GW |
Transverse sensitivity * (max.) | 6% |
Sensing material | PZT |
Construction | Center Mounted compression |
Case material | SS |
Type of connection | Side |
Output Connector | 10-32 UNF |
Weight (gms) | 41 ± 2 |
Mounting thread | M5 |
Height (mm) | 26 ± 0.5 |
Spanner size (mm) | 18 |
ACCESSORIES SUPPLIED
Low noise Cable : AC 3XXX
Mounting studs – set of 5 AS 1001 : 1 Set
Note: 1) * Calibration Data supplied with each unit.
** Typical Test Data
*** Design Values
2) Third Party certificate from ETDC can be provided at an extra cost.
3) Due to continuous up-gradation of products, specifications subject to change without notice.
4) XXX represents the length of cable in meters, length to be specified by the customer. If the length is not specified, it shall be considered as 1 Mtr. cable.
** ** ** ** ** ** ** ** **