1.hydraulic
2.adopt hydraulic control technology
3.full range, four dials
Port: Ning bo,Shanghai
Minimum Order Quantity: 1 Set/Sets negotiation
Supply Ability: 30 Set/Sets per Month negotiation
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: wooden case
Delivery Detail: 15 days after payment,special for request.
YE hydraulic pressure testing machine (tester)
It is applicable for the laboratories in the industries such as road,bridge,building material etc. It can be used for determining the compressive strength and thunderbolt test of the building materials such as con crete,sand pump,cement, cement products,hollowbricks,fire-retardant bricks,enineering ceramics,engineering plastics and products,stone,timber etc. It is a necessary weapon to various laboratories. Model YE-2000B pressure tester is equipped with loading tracking system according to the requirements from the state GB/T50081-2002 Concrete,Dynanmics Performance Testing Method Standard.It can offer the coresponding loading speed ratio according to the experimental demands.
main technical parameter:
Max. test force | 2000KN | ||
Space | Max. span between platens | 340mm | |
Lower platen max. diameter | φ290mm | ||
Various levels of load indicative range | A' | 0-200KN | 0.5KN/grid |
A'+A | 0-400KN | 1KN/grid | |
A'+A+B | 0-1000KN | 2.5KN/grid | |
A'+A+B+C | 0-2000KN | 5KN/grid | |
Measuring relative error(no higher than) | ±1% | ||
Measuring relative variation value(no higher than) | 1% | ||
Measuring relative error (no higher than) | 1.5% | ||
30-second of load keeping, variation not exceeds 0.5% of max. experimental force each level | |||
Piston stroke | 80mm | ||
Noise level | ≤80dB | ||
Outline dimension (L*W*H) | 1170×850×1665mm | ||
Motor power | 2.2KW | ||
Net weight | 1350kg |