1.Grain Moisture Tester
2.high accuracy
3.for Barley,Corn,Hay,Oats,Rapeseed,RoughRice,Sorghum,
Soybeans.wheat
4.3year warran
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: by standard export wooden case
Delivery Detail: within 10 working days after order
2012 professional Grain Moisture Tester
Tester summary:
The Grain Moisture Tester is used for fast and accurate measurement of moisture in the process of allotment,
acquisition, storage, machining of packed grains, Barley, Corn, Hay, Oats, Rapeseed, RoughRice, Sorghum,
Soybeans and Wheat.
1.Features of the Grain Moisture Tester:
1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3. It will save time and expense by monitoring dryness and helps top revent deter ioration & decay caused by
moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4. The moisture meter operates by electrical resistance and has automatic temperature compensation.
1.5.Measurements are taken by inserting the sensors into the bale of grains .
1.6.Manual off at any time. Auto power off after 5 minutes from last operation.
2.Specification
Display:4 digital LCD
Measuring range :6-30%
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1
Accuracy: ±0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply:4x1.5 AAA size (UM-4) battery
Dimensions:460×75×35mm 18.3x3x1.4 inch
Weight:: 203g (not including batteries)
3.Operation procedure
3.1 Turn on the power key 3-9,the symbol “0”will be showed on display. It will need zeroing if showed othe
rvalue, please depress ZERO key 3-5 while the probe sensor without touch anything, or zeroing is not efficient.
makezeroing can decrease the effect from the temperature and humidity in the air.
3.2 Hold the instrument with your hand, insert the probesinto the materials straightly. The probes are more deeper, the value is better.
3.3 Depress Hold key 3-10,the symbol “Max”will be showed on display,then the max value must be stored on
display when measuring. Depress the key 3-10 again, this function will be canceled.
3.4 Choose the suitable code for different grain.Depress the key 3-9 and not releae until the“CDXX" showed on
display, then press 3-5 or 3-10 key to choose your needed code. Please refer to the table in 8.0
4.Warning setting
4.1 Depressing key 3-9 and don't release until“AL2”showed on display it will takes 5 seconds to complete
operation), then press key 3-5 or 3-10 to choose your suitable value according to your need, press key 3-10 again
back to the operation state.
4.2 Setting the “AL1” just the same ways as “AL2”.
4.3 Usually ,“AL2”must larger than “AL1”,if the “AL2” less than “AL1” during settingprocess, then the
instrument will be returned back the factory setting, just to say,AL1=13,AL2=18.
5.Replace batteries
When battery symbol showed on display, it must replace the batteries in time. Slide the batteries cover, put the
batteries into the hole correctly.
6.Notes:
Please take out the batteries if the Grain Moisture Tester without use fora long time. Put the probe in the air without touch
anything when zeroing, or the zeroing is not efficient.