heat seal packaging equipment
parameters include heat seal temperature, the pressure of heat seal and suitable heat seal speed
Port: qingdao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 100 Set/Sets per Month
Payment Terms: L/C,T/T,cash
Contact Supplier
Packaging Detail: plywood ctns packing
Delivery Detail: two weeks after order confirmed
heat seal packaging equipment
model number:DRK133
It can meet ASTM F2029, QB/T 2358(ZBY 28004),YBB 00122003 , heal seal
capacity is one of most important performance in plastic package , The seal parameters
include heat seal temperature, the pressure of heat seal and suitable heat seal
speed ,etc .It is widely applied in plastic film material, soft packaging laminated film and
other laminated film.
Technical parameters:
Heat-seal area: 300mm(length)×10mm(width)
Temperature: Room temperature ~300°C (accuracy ±1°C)
Time: 0.01s~999.9s
Heat-seal pressure: 0-0.8 Mpa
Gas supply pressure: 0.4~0.6 MPa
Dimension: 700mm×400mm×540mm (mm)
Power: AC220V, 50HZ
For more information, pls contact me,ketty.13153144576
http://www.drktest.com
jinan drick instruments co.,ltd
Model No.: SG-200M
Features: SALT SPRAY TESTER
The salt spray tester is used to test the anti-erosion quality of the surface of all materials after the rust
Model No.: SG-H03UV2
Features: This tester is used in more labs throughout the world than any other accelerated weathering tester. In just a few days or weeks,
Model No.: YF-3020F
Features: Tester Equipment
1.Japan SONY CCD
2.Accuracy:0.003mm
3.Resolution:0.0005mm
4.Travel:300X200mm
Model No.: SG-B01B
Features: the pressure strength of cartons, containers, etc. for inspecting the pressure-resistance and strike-endurance of packing materi
Model No.: SG-S05B
Features: Foam testing machine,
FOAM PRESSURE testing machine
test operation becomes faster,
flexibly and protect conveniently.
Model No.: SG-S02B
Features: used to determine the plasticity and recovery of un-vulcanized rubber, uncompounded rubber, compounded rubber reclaim rubber.
Model No.: BS, QB
Features: FIBREBOARD FLEXING TESTER is used for testing the fibreboards such as insole foreparts and stiffener that are flexed or deformed
Model No.: DRK122B
Features: Haze Meter test light transmittance and haze of plastic film, glass, ASTM D1003-61 (1997): Standard Test Method for Haze and Lum
Model No.: DRK111B
Features: Folding endurance tester adopts the technology of SCM, photo electricity and folding clamp restores automatically. LCD displays
Model No.: DRK106
Features: 1. International Taber Method
2. ISO 2493, GB2679.3
3. Small in dimension, light in weight
4. Economic
Model No.: DRK108C
Features: Elmendorf Tearing Tester to test tear strength of all kinds of woven fabrics, thick paper, plastic sheets, electrical tape,
Model No.: DRK109
Features: DRK109 Bursting Strength Tester
paper and cardboard test, signal transmitting press, pneumatic clamp, LCD, ISO2758, ISO2759