gradient meter, gradiometer,inclinometer sensor
1 Measuring method: Accurate pointing/ direct reading
2 Measuring angle range:
Port: HK
Minimum Order Quantity: 1 Piece/Pieces customazied
Supply Ability: 100 Piece/Pieces per Week customazied
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: in carton
Delivery Detail: 10-30 buisess days
gradient meter, gradiometer,inclinometer sensor SDC300
Features
1.) In-built solid sensor component,with features of
compact structure,Light weight and high anti-vibration
2.) Capable of monitoring voltage of battery
3.) Multi-group data tested for each measured point,with
function of self-calibration;
4.) Special rechargeable battery cartridge used;
5.) Output results can be save permanently with low cost of
consumables;
In comparison to traditional pointer, SDC200 has the following advantages:
a) SDC300 adopted the 2-Axis inclinometer with high accuracy which successfully applied to defense devices. (Resolution up to0.01°)
b) Optimum design of Downhole instrument structure,Cancelled the oscillating device, which cause an operation to be more easy,and save time, When measurement inclination probe reached to destination
Applications
1. Measuring the attitude parameters of petroleum deflected well engineering;
2. Measuring the bending of geological drilling;
3. Replacing singular shot imaging inclinometer;
4,Mainly used to monitor deep footing groove, side slope, groundsill, pier and so on foundation displacement during observed.
Technical Datas
| SDC300Parameters Value Units |
| Measuring range of zenith angle | -90~+90 | ° |
| Measuring accuracy of zenith angle | ≤0.05 | ° |
| Resolution | 0.01 | ° |
| Measuring method | Accurate pointing/ direct reading | |
| Measuring points | Arbitrarily | |
| Power supply | AC 220V±10% | % |
| Frequency | 50Hz±10% | Hz |
| Ground instrument working conditions | Temperature-10~+50 | °C |
| Humidity | ≤85% | % |
| Downhole instrument working conditions | 0~85 | °C |
| Pressure | ≤25 | MPa |
| Ground instrument size | 280×310×115 | mm |
| Weight | 2.5 | Kg |
| Downhole instrument size | Φ50×1350mm | % |
| weight | 15 | Kg |
Model No.: TC312C/C1
Features: This series of products are designed using single-chip microprocessor, LSI and PLD. The power supply uses high efficiency high q
Model No.: TC5111B
Features: Cymometer, function generator, digital multimeter, 4-in-1 combination of power
High reliability design, easy to operate
Model No.: TC3386A/B
Features: Microcomputer controlled, developed with CPLD and modular design
100MHz synchronous equal-accuracy measurement mode
SMT te
Model No.: TC-10C/100C/1000C/3000C
Features: Single-chip microcomputer controlled
Equal-accuracy measurement
SMT technology
High reliability
8 LEDs display
Model No.: TC701
Features: High frequency (320MHz) time base and equal-accuracy period-average measurement techniques improve measurement accuracy for the
Model No.: TC3386A/B
Features: Microcomputer controlled, developed with CPLD and modular design
100MHz synchronous equal-accuracy measurement mode
SMT te
Model No.: TC3382A1/B1/C1/D1
Features: Using microwave sampling techniques
Using microcomputer to manage measurement, computing and display
High sensitivity, accu
Model No.: TC1633
Features: waveform length:64~8192 points;
vertical resolution: 12 bits;
sample rate: 40MSa/S;
Model No.: 8644B-001-002
Features: Agilent 8644B-001-002 Signal Generators
Model No.: YH7002
Features: Loop calibrator YH7002
Fluke-705 Loop Calibrator
LCD with font height 22mm
Power output 24V DC
Loop Current measurement
Model No.: PF1635/PF1642
Features: High frequency function generator,function generator,square wave generator,rectangular wave generator,sawtooth wave generator
Model No.: YX101/TSG-17
Features: signal generator,sine wave generator,sine signal generator,sine wave machine,frequency generator,low frequency generator