gas meter counter LH-G29 - LH-G29

1.Customized products are available

2.Superior service and less lead time

3.All of our counters will be inspected and calibrated completed according to your drawings and requirements after finishing production to ensure all of them are qualified.

4.We can produce various counters from plastic frame to aluminum frame and also can produce counters specially according to your own designs..

5.Any suggestions and feedback you might have will be highly appreciated, our valued customers.

1, working voltage rating: 4±0.5V

2, working pulse width rating: ≥80MS

3, rated working pulse interval: ≥50MS

4, coil resistance: 430±5%ohm (23±2)

5, velocity ratio: 100:1; 200:1; 400:1; 800:1

6, stepping angle: 3.6; 1.8; 0.9; 0.45 degree

7, step motor driving torque: 30u Nm

8, specifications (quantity of character 5+1(five integers with one decimal)

wheel): 6+1(six integers with one decimal)

9, character wheel material: PC

10, rotating direction of character wheel clockwise rotation only

11, lead length 130mm

12, range of working ambient temperature: -40-70

13, variable-speed gear material: polyoxymethylene

14, base frame material: 1. aluminum alloy base frame: LF2-YZ

2. plastic base frame: PC

15, motor stator material: ferronickel alloy

16, shielding cover material: low-carbon steel shielding cover

17, error-free working period: ≥one billion pulse

18, installation dimension: upper fitting hole space: 24.5*35mm

lower fitting hole space: 30.5*30.5mm

19, motor position on counter: horizontal or vertical

20, electrical connection: flying wire 100+/-5mm or on request