fish tank touch screen controller - HMAQ-016

fish tank touch screen controller

1. INTRODUCTION

Aquarium touch screen controller is an economical and easy to operate new controller.

This product is the latest development of the large-screen aquarium controller, using large-screen touch-screen display, richer and show more clearly.

Using Advance artificial intelligence control algorithm with Auto turning Using the latest touch-button technology, high technology Switching power supply with wide range, more stable and reliable performance

2. TECHNICAL SPECIFICATION

Rated Power: 220V/50HZ

Dimensions: 80mm * 175mm

Screen size: 54 * 120mm

Mounting enclosure dimensions: 163.3mm

Install size: 71 * 140mm

Product Installation: flush mounting.

3. FRONT PANEL

4. OPERATION DESCRIPTION

5. Accessories and wiring:

Socket, size: 269(234)*84*41mm

Attachment explains:

As shown in accordance with, the corresponding cable to the corresponding position, lamp 1 and lamp 2 can be confusing connections

Note:

• If you do not need to, you can only connect a water pump;
• Plus hot in the summer you can not connect;
• Lighting is to facilitate other operations and settings, and only when the operation will work, when not turned off!

Display behind the structure:

The bottom outlet structure:

Sticking display:

NOTE:

Products appearance has three colors for users to choose. As the follows:

Sticking

At the letters of "LOGO" can be replaced to the letters or words according to customer requirements, but need to contact us in advance.

5. Mode:Manual mode and Automatic mode

Manual mode: All control is manual in addition to temperature control and doesn't run by time. In addition to heating and cooling relays, the other relays each power up is turned off by default.

All through the time control system functions are controlled manually, not by time to run. Without time control function, but also the factory default parameter values, if the factory defaults parameter values are unsuitable, but can be reset.

Automatic mode:

Lamp 1 turn-on time: 7:00 Light 1 turn-off time: 17:00

Light 2 turn-on time: 7:00 Light 2 turn-off time: 17:00

UV turn-on time: 7:00 UV turn-off time: 17:00.

Water Pump time: 24 hours continuous operation

Oxygen time: 24 hours continuous operation

Note: Data of many parameters for the standard mode are fixed, so the items needed to be set are relatively small.

The turn-on and turn-off of many functions for manual mode are manually operating, so the items needed to be set are relatively small.

during setting if there is no button operation for 10 seconds, it will automatically save the data has been set and exit setup.

Choose to run the tank model is based on programmed, the system default is ten hours, if more than this time and no one operation (manual mode), the system according to automatic mode.

6. Temperature control mode:

Heating rods: When the actual temperature "Settings value of 1 degree C, the temperature control relay, the heating rods began to heat up. Actual temperature> set value, the temperature control relay bounce, heating rods stop heating. (Such as setting the water temperature is 30.0 degree C, <29.0 degree C temperature relay,> 30.0 degree C temperature relay bounce.)

7.NOTE:Using this product please first connected lamps the line again electrify.