environment simulation inspection chamber (HZ-2020B) - HZ-2020B

environment simulation inspection chamber, 1,temperature accuraty +/-0.5dgree, 2.humidity +/-0.2, 3.compressor France Taikang - more info check here: http://www.buymeasuringtools.com/environment-simulation-inspection-chamber-HZ-2020B-10084654/

Quick Brief

Place of Origin: Guangdong China (Mainland) Brand Name: lixian Model Number: HZ-2020B Power: Electronic Usage: low temperature equipment standard: ISO ASTM CE temperature: RT to -30oC fluctuate/uniformly: ≤±0.5oC /.+2oC -3oC Cooling time: 25oC to -30oC about 80min Compressor start delay: 5min Timer: 0.1 to 999.9(S.M.H.) adjustable Voltage: AC380V±10% 50±0.5Hz Three-phase five-... environmental temperature: 5oC to 30oC ≤85%R.H Controller: LED digital P.I.D. +S.S.R.microcomp... accuracy: Setting accuracytemperature ±0.1oC

Specifications and Product Details:

environment simulation inspection chamber

Equipment summary:

Low temperature test chamber is used to test the material's property low-temperature, such as electrical, electronic products., as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements, it simulate the environment to test proformance of material as well as other relevant characteristics of physical at low temperature, Through testing to determine product performance whether it is still be able to meet the intended requirements.

Corresponding standard

1.GB 10589-89 low temperature testing condition
2. GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and electronic products.
3. GB2423.1-89 The basic test regulation for electrical and electronic products, Test A: low-temperature test method

Applicable industries :

Applied to test the prodcuts quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care ... and so on.

Model		HZ-2020B-80	HZ-2020B-100	HZ-2020B-150
Inner size D×W×H		400500400 mm	400500500 mm	500600500 mm
Outer size D×W×H		according actual size
index	temperature	RT to -30^oC
	fluctuate/uniformly	≤±0.5^oC /.+2^oC -3^oC
	Cooling time	25^oC to -30^oC about 80min
control system	Controller	LED digital P.I.D. +S.S.R.microcomputer controller
	accuracy	Setting accuracytemperature ±0.1^oC,directed accuracytemperature ±0.1^oC,resolution ±0.1^oC
	Cooling system	Totally enclosed air-cooled single-stage compression refrigerate mode / original from French "Taikang" / totally enclosed air-cooled re-compression refrigerate mode
	Compressor start delay	5min
	Circulatory system	Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel
material	Outer material	SUS304 stainless steel hairline treatment
	Inside material	SUS304 High-quality stainless steel light board
	insulation	Rigid polyurethane foam, ultra-fine glass fiber cotton
Standard collocation		a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs, test leads holes (25,50 mm) 1 pcs
Protector		Leak current, short circuit, over temperature, motor overheating, over-pressure compressor, overload, over-current protection
Timer		0.1 to 999.9(S.M.H.) adjustable
Power		2.5KW
Voltage		AC380V±10% 50±0.5Hz Three-phase five-wire system
environmental temperature		5^oC to 30^oC ≤85%R.H
annotation 1. Above data were measured at temperature (QT) 25^oC and no-load condition. 2. Can be customized non-standard-type high-low-temperature testing mechine according to uses requirements