dual oscilloscope with multimeter-HDS2062M-N - HDS2062M-N

Dual Oscilloscope, 3 in 1(DSO+Multimeter+Cymometer), USB Flash Disk Storage, all CE approval - more info check here: http://www.buymeasuringtools.com/dual-oscilloscope-with-multimeter-HDS2062M-N-10212978/

Quick Brief

Place of Origin: Fujian China (Mainland) Brand Name: OWON Model Number: HDS2062M-N Model: oscilloscope Certification: ISO,CE,FCC,CMC

Specifications and Product Details:

HDS2062M-N---handheld digital storage oscilloscope with multimeter

Dual Oscilloscope Main Features

1. 2 in 1(DSO+Multimeter)

2. Auto scale

3. FFT

4. 20 automatic measurements

5. Bandwidth: 20MHz-60MHz

6. Support USB for data transmission to PC

7. Replaceable li-ion battery back up(6hours)

8. USB flash disk storage

9. Waveform record and replay

Performance Characteristics

Model		HDS2062M-N
Bandwidth		60MHz
Sample rate(Real time)		250MS/s
Horizontal Scale(S/div)		5ns/div~100s/div, step by 1~2~5
Rise time (at input, typical)		≤5.8ns
Display		3.7 inch color display with TFT panel(640×480 pixels, 65535 colors)
Channels		Dual
Input impedance		1MΩ±2%,in parallel with 15pF±5pF
Probe attenuation factor		1X,10X,100X,1000X
Max. input voltage		400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
Record length		Max.6000 points on each channel
Interpolation		(sin x)/x
Input coupling		DC, AC, GND
Acquisition modes		Sample, Peak Detect and Average
Vertical resolution (A/D)		8 bit (2 channels simultaneously )
Vertical sensitivity		5mV/div~5V/div(at input)
DC gain accuracy		±3%
DC accuracy(Average)		Average>16:±(5% reading+0.05div) for V
Trigger type		Edge, Video, Alternate
Trigger mode		Auto, Normal, Single
Trigger level		±6 divisions from screen center
Automatic measurement		Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Pre-shoot,Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A B ,Delay A B
Waveform math		+, -, ×, ÷, FFT
Waveform storage		4 waveforms
Lissajou’s figure	Bandwidth	60MHz
	Phase difference	±3 degrees
Communication interface		USB
Cymometer		Available
Power supply		100V-240V AC, 50/60Hz
Li-ion battery		7.4V, 6 hours operation

Multimeter Specifications

Full scale reading	Diode
Input Impedance	On/Off measurement
Capacitance	51.2nF-100uF:±(3%±3 digit)
Voltage	VDC: 400mV, 4V, 400V: ± (1±1digit) Max. input: DC 1000V, VAC:4V,40V,400V:±(1±3digit)Frequency:40Hz-400Hz, Max: input: AC 750V(virtual value)
Current	DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)
Impedance	400Ω:±(1%±3digit), 40Ω

Application

Electronic circuit debugging

Circuit testing

Design and manufacture

Education and training

Automobile maintenance and testing

Warranty

Accessories