dual oscilloscope-HDS1022M-N used digital oscilloscopes HDS1022M-N

dual oscilloscope-HDS1022M-N used digital oscilloscopes - HDS1022M-N

dual oscilloscope:, 1. 2 in 1(DSO_Multimeter), 2. support USB for data transmission to PC, 3. USB storage - more info check here: http://www.buymeasuringtools.com/dual-oscilloscope-HDS1022M-N-used-digital-oscilloscopes-10191679/

Quick Brief

Place of Origin: Fujian China (Mainland) Brand Name: OWON Model Number: HDS1022M-N Model: dual oscilloscope certification: ISO,CE,FCC,CMC Dimension: 180mm*115mm*40mm

Specifications and Product Details:

Dual Oscilloscope Main Features

1. 2 in 1 (DSO+Multimeter)

2. Auto scale

3. FFT

4. 20 automatic measurements

5. Bandwidth: 20MHz-100MHz

6. Support USB for data transmission to PC

7. Replaceable Li-ion battery backup (6 hours)

8. USB flash disk storage

Performance characteristics

Model		HDS1022M-N
Bandwidth		20MHz
Sample rate(Real time)		100MS/s
Horizontal Scale(S/div)		5ns/div~100s/div, step by 1~2.5~5
Rise time (at input, typical)		≤17.5ns
Display		3.7 inch color display with TFT panel(640×480 pixels, 65535 colors)
Channels		Dual
Input impedance		1MΩ±2%,in parallel with 20pF±5pF
Probe attenuation factor		1X,10X,100X,1000X
Max. input voltage		400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
Record length		Max.6000 points on each channel
Interpolation		(sin x)/x
Input coupling		DC, AC, GND
Acquisition modes		Sample, Peak Detect and Average
Vertical resolution (A/D)		8 bit (2 channels simultaneously )
Vertical sensitivity		5mV/div~5V/div(at input)
DC gain accuracy		±3%
DC accuracy(Average)		Average>16:±(5% reading+0.05div) for V
Trigger type		Edge, Video, Alternate
Trigger mode		Auto, Normal, Single
Trigger level		±6 divisions from screen center
Automatic measurement		Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Pre-shoot,Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A B ,Delay A B
Waveform math		+, -, ×, ÷, FFT
Waveform storage		4 waveforms
Lissajou’s figure	Bandwidth	20MHz
	Phase difference	±3 degrees
Communication interface		USB
Cymometer		Unavailable
Power supply		100V-240V AC, 50/60Hz
Li-ion battery		7.4V, 6 hours operation

Multimeter Specifications

Full scale reading	3 ¾ digits (Max.4000-count)
Input Impedance	10MΩ
Capacitance	51.2nF-100uF:±(3%±3 digit)
Voltage	VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V,400V:±(1±3digit) Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value)
Current	DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)
Impedance	400Ω:±(1%±3digit), 40Ω