diesel fuel tank cleaning tester TLD-CT
1.easy to operate
2.high technology
3.220v 110v
Port: qingdao guangzhou shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10 Set/Sets per Week
Payment Terms: T/T,Western Union
Contact Supplier
Packaging Detail: wooden box
Delivery Detail: one to three days after receiving balance
diesel fuel tank cleaning tester TLD-CT
introduction:
the diesel cleaner is for clean all kinds of diesel carriages .it doesn't need to knock down the carriages and tubing when cleaning ,the work principle is:draw out the oil, enter into the coase filter tank to filter the large particles and water, then enter into the fine filtration tank to filter the small particles after pressing by the gear pump.then the injector jet to the side and dead space of the tank at the 1.5mpa, uniform the oil and impuries, loop filter at the fow of 30L/minuter, then stop after the tank is clean.
operation way:
1.bent the injector to appropriate point, insert lateral cavity by the hole of the clapboard
2.put the tub to the bottom of the tank
3.turn on the power.let the switch veering, the normal clean direction
4.held the boom to inject the lateral cavity and dead space
warm tips:
raise 5-10 cm of the tires,use rotation nozzle when the less than 1/2 and use directing nozzle when the oil more than 1/2 of the tank
notes:
tightening the injector when replacing ,turn off the power ,clean,replace the filter when the veering pressure beyond 2.5mpa ,protect the tube from stoppage when reversing, the window glass will be broken when the inside pressure of coarse filter tank beyond 1.5mpa
replacement of the filter:
1.et the nozzle of the oil tube out of the oil surface
2.turn on the veering, stop when the nozzle doesnt injection
3.turn on the reverse, stop when the pump tubing doesnt injection
Model No.: HZ-3609B
Features: 1.Shoes lining testing machine
2.rubber-faced, rubber shoes and shoes lined
3.high quality guarantee
4.reasonable price
Model No.: HZ-4113
Features: 1. breakdown voltage tester;
2.high accuracy;
3.high quality;
4.easy to operate;
5.maintain 3 years;
Model No.: HZ-4102
Features: 1. Unidirectional scraping paint tester;
2.high accuracy;
3.high quality;
4.new designed type;
5.maintain 3 years;
Model No.: HZ-3203A
Features: 1. Spring high-frequency vibration Fatigue Tester;
2. high accuracy;
3. easy to operateand muiti-function;
4.maintain 3 years
Model No.: TC-I
Features: balancing machine
widely in engine balancing
wind motor balancing
blower balancing machine
diesel engine balancing machine
Model No.: DRK127
Features: COF tester-kinetic and static friction coefficient tester
micro-computer control
LCD display data ,results and curves
slider:
Model No.: DRK113
Features: DRK113 digital ring crush tester
carboard's edge crush test, pin adhesive test, flat crush test
test papermaking,packaging
Model No.:
Features: diesel fuel injection pump tester
common rail injector unit tester
Model No.: HZ-009
Features: Full-automatic compression testing machine
1.Max load 3000KN
2.error +/-1%
3.force resolution 0.03kN
4.3 years warranty
Model No.: HZ-008
Features: Full-automatic resist bending compression testing machine
1.Max load 300kN/10kN
2.Test Force Resolution 0.01kN
3.3year warran
Model No.: HZ-008
Features: 1.compression testing machine
2.automatically calculates the results and print reports
3.overload protection
4.3year warranty
Model No.: HZ-4103
Features: Enameled wire elongation tester
1. high accuracy;
2.easy tooperate and move;
3.reasonable price;
4.3 years warranty;