1.Contactless belt tension gauge
2.Measuring sound wave
3.Available for V belt, Timing belt, Flat belt, Poly V belt
Port: TOKYO
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 5 Piece/Pieces per Month
Payment Terms: T/T
Contact Supplier
Introduction
To show a best performance of transmission belts, one of the most important thing is
proper tension strength.
" DOCTOR TENSION TYPE-3 " is contactless belt tension gauge measuring sound wave.
You can measure easier than now!
Characteristic
1.Available for V belt, Timing belt, Flat belt, Poly V belt
2.You can see " frequency of sound wave " & " tension strength " together at one screen.
3.You can choose [kgf] or [N] as indication of tension strength.
4.Short measuring time (0.5 sounds over)
5.You can memory 10 patterns of " belt condition " & 89 patterns of " a mass per 1 meter(kg/m) ".
6.Automatically power-off at 5 minutes later from the last operation.
How to measure
1.Turn off the power of a driving system, and confirm the standstill of belt-drive.
2.Turn on the " Dr.tension ", input a data of belt condition.
3.Set the sensor head as following.
4.Hit the belt by a grip of a screwdriver etc. & make belt vibrate.
5.Measure several times & record the average.
Specification
[measurable frequency] 10.0 ˜ 999Hz
[measurement accuracy] ±1Hz(less than 100Hz), ±1%(over 100Hz)
[data which is able to set]
[unit mass] 0.0001 ˜ 9.9999kg/m
[belt width] 1.0 ˜ 999.9mm
[belt span length] 1 ˜ 9999mm
[number of rib] 1 ˜ 99
[working temperature & humidity] -10°c ˜ 50°c, less than 80%(Don't use under condensation)
[storage temperature & humidity] -20°c ˜ 70°c, less than 70%(Don't stock under condensation)
[power source] 2 pieces of size AA battery
[battery life] about 30 hours
[dimensions & weight] 13.5×96×160mm, 240g
[accessories] 2 pieces of size AA battery, 1 piece of flexible microphone sensor
[selling separately] AC adapter(Japanese standards), code type microphone sensor