Two measuring methods of paint coating thickness gauge: magnetic induction (F) and eddy current (N)
- 6 types of probes are available for various applications
- 2 measurement modes: continuous / single
- 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
- Memory up to 495 readings
- Direct testing mode and block statistics mode (APPL/BATCH)
- Direct print out of statistical values
- Dataview for connecting with PC is available
- Low battery indication
Two switch off modes: manual and auto
- 6 types of probes are available for various applications
- 2 measurement modes: continuous / single
- 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
- Memory up to 495 readings
- Direct testing mode and block statistics mode (APPL/BATCH)
- Direct print out of statistical values
- Dataview for connecting with PC is available
- Low battery indication
Two switch off modes: manual and auto
Technical Specification |
Measuring range | Refer to the table below | Probes available | Tolerance | Minimum resolution: | Measuring condition | Operation language | English | Standards | DIN, ISO, ASTM,BS | Calibration | Zero and foil calibration | Statistics | Number of measurements, mean, standard deviation, maximum and minimum of 3000 readings | Data memory | 495 readings | Limits | Adjustable with alarm | Interface | RS-232 | Working temperature | 0-40°C | power supply | Nicd rechargeable batteries 1.25V | Dimensions | 270mm×86mm×47mm | Weight | Approx. 530g |
|
Optional probes and technical specification |
Probe model | F400 | F1 | F1/90º | F10 | N1 | CN02 | Operating principle | Magnetic induction | Eddy current | Measuring range (µm) | 0-400 | 0-1250 | 0-10000 | 0 to 1250 μm 0 to 40μm (for chromeplate on copper) | 10~200 | Low range resolution (µm) | 0.1 | 0.1 | 10 | 0.1 | 1 | Accuracy | One-point calibration (µm) | ±(3%H+1) | ±(3%H+10) | ±(3%H+1.5) | ±(3%H+1) | Two-point calibration (µm) | ±[(1~3)H%+0.7] | ±[(1~3)H%+1] | ±[(1~3)%H+10] | ±[(1~3)%H+1.5] | | Measuring conditions | Min curvature of the min area (mm) | Convex | 1 | 1.5 | Flatten | 10 | 3 | Flatten | Diameter of the min area (mm) | φ3 | φ7 | φ7 | φ40 | φ5 | φ7 | Critical thickness of substrate (mm) | 0.2 | 0.5 | 0.5 | 2 | 0.3 | unlimited | | | | | | | | | | | | | | | | |
Standard delivery | - Main unit
- Calibration foil set
- Substrate
- Charger
- Probe
- Instruction manual
- TIME certificate
- Warranty card
|
|