aquarium ph controller--industrial online
1.Scale: 0~14pH
2.Output:4~20mA
3.Temperature:0-100C
Port: Qingdao
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 500 Unit/Units per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: 1 unit in single wooden case.
Delivery Detail: 1-2 weeks after receive payment
AD18 aquarium ph controller--industrial online
Brief Introduction
AD18 series pH / ORP intelligent controller is coupled with powerful and stable industrial microprocessor. It’s strong anti-interference and simple maintenance. AD18 can connect with various types of electrodes and then can be widely used in water treatment, chemical industrial process, paper industry and food industry. The built-in dot matrix LCD can display pH values, mV value, temperature, alarm settings and time. Configuration menu is simple and flexible, easy for operation. AD18 can be connected with digital smart electrode which made by CHEMINS INSTRUMENT, to achieve full digital detection and communication. Digital smart electrode build-in patented chip, can be pre-calibrated to plug and play on industrial site. Because of digital communications between AD18 analyzer and the smart electrode, the anti-jamming ability of AD18 analyzer is much better than the conventional pH/ORP analyzer. It’s especially suitable for serious industrial scene with strong interference
Technical parameter:
AD18 aquarium ph controller--industrial online
Power supply | 220VAC, 50/60Hz. |
Measurement range | 0.00 ~ 14.00pH, -1000mV~+1000mV, 0°C~60°C. |
Display type | LCD. |
Display information | pH / ORP (mV), pH mV, temperature, proportion of 4~20mA output. |
Temperature compensation | Automatic. |
Transmission signal | 4 to 20mA isolated output. |
Alarm output | 2 separate relay output: H, L |
pH ORP Accuracy | 0.03pH, 2mV |
Temperature accuracy | 0.1°C |
Dimension | 96×96×120mm |
Composite glass PH electrode parameters | |
Sensor film type | General type, low resistant type (option), Alkali-proof type (option) |
Salt bridge type | TEFLON, Ceramics (option) |
Integrated temperature sensor (Option) | Pt100, Pt1000, 10K, 2.252K |
Jacket material | PPS (polyphenylene sulfide) |
Jacket connection dimension | Cable, 3/4 BSP” thread, or others. |