TH2818XB meter is an automatic transformer multi-parameter measurement instrument .
Port: Shenzhne
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100 Piece/Pieces per Day
Payment Terms: T/T,MoneyGram
Contact Supplier
TH2818XB meter -------- an automatic transformer multi-parameter measurement instrument--------FREE SHIPPING
TH2818XB meter is an automatic transformer multi-parameter measurement instrument used for quality control of electronic transformer over a wide range of frequency (20 Hz to 300 kHz).
Almost all low-voltage transformer parameters can be scanned. The primary parameters include Inductance L, Leakage Inductance Lk, Turns-Ratio Tr, DC resistance DCR, Impedance |Z|, and Capacitance (between windings) C etc.;
The secondary parameters include Quality Factor Q , ESR and Phase etc., Pin short can also be detected. The advanced digital sampling technique and high-speed scanning test fixture make the transformer inspection more accurate and efficient, which used to be of low efficiency before such a system was used.
The system provides several signal output impedances for selection in order to be compatible with some well-known LCR instrument providers when an inductor is measured. Turns-ratio is calculated by the inductance of primary and secondary windings, which decreases the measurement error caused by large leakage of magnetic flux, for example low-coupling coefficient transformer.
100mA bias source (option) is selected to perform DC bias measurement for network transformer, filter, etc. at as 2 times speed as other instruments. And the measurement result can be compatible with that of Agilent 4284A.