automation A/C and oil pressure switch:
Mounting Mode 7/16-20 UNF-2B or Copper Tube
Wire cable AWG 20 300V/600V
Port: shanghai
Minimum Order Quantity: 1000 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: carton
Delivery Detail: within 1 week
Item | Parameter |
Pressure Setting Range | 2.2 Mpa ON, 2.9Mpa OFF or as client required ( setting from 0.15MPa to 3.05Mpa.) |
Electrical Ratings | 120/240VAC, 375VA; 28VAC/VDC, 2A; 120VAC, 5.8FLA, 34LRA; 240VAC, 2.9FLA, 15LRA |
Ambient Temperature And Humidity | -35°C+120°C; Less Than 95% RH |
Controlling mode | Automatic reset |
Contact Resistance | Less Than 20mΩ |
Insulation Resistance | More Than 100ΩMΩ |
Dielectric Voltage Withstand | Withstand 1500VAC For One Minute Without Breakdown |
Burst Pressure | 35Mpa For One Minute Without Body Rupture And Seals Failure |
Leakage | Total Maximum Allowable Leak Rate Of 7×10-6cc/sec Of At Least 70% Helium At 1.0Mpa |
Mounting Mode | 7/16-20 UNF-2B or Copper Tube |
Wire cable | AWG 20 300V/600V |
Durability | 100,000 Cycles (Automatic) |
Flame rated | UL94V-0 |
Model No.: 265DR
Features: 1 Model 265DR is a differential pressure transmitter with remote seal
2 It is a reliable sensing system coupled
Model No.: 261GR
Features: 1 4 to 20 mA output with HART communication as standard
2 Conforms to SIL2 acc. to IEC 61508 / IEC 61511
3 Full compliance
Model No.: 261GR
Features: 1.4 to 20 mA output with HART communication as standard
2.Conforms to SIL2 acc. to IEC 61508 / IEC 61511
Model No.: ABB261GR
Features: 1 The tranmsitter provides local zero and span adjustments even without display.
2 Full compliance with PED Category III
Model No.: 261GR
Features: 1.Base accuracy 0.1 %
2.Span limits: 6 to 60000kPa; 24inH2O to 8700psi
3.4 to 20 mA output with HART communication as standar
Model No.: 261GS
Features: 1.Conforms to SIL2 acc. to IEC 61508 / IEC 61511
2.Full compliance with PED Category III
Model No.: 261GS
Features: 1.Span limits: 0.3 to 60000kPa; 1.2inH2O to 8700psi
2.Base accuracy 0.1 %
3.Full compliance with PED Category III
Model No.: 364DD
Features: 1.On board LCD display with intuitive menu navigation.
2.In compliance with PED, category III
Model No.: 265DC
Features: 1 This direct mount transmitter with remote seal works
2 within a broad selection of variants options fill fluids and wetted
Model No.: 264HC
Features: 1 with seal works within a broad selection of variants, options, fill fluids and wetted materials
2 providing applications
Model No.: 264HC
Features: 1.Base accuracy 0.075%
2.Span limits 1.1 to 16000kPa; 4.35inH2O to 2320psi
3.5 years stability
4.high performance
Model No.: 264HC
Features: 1.Multiple protocol availability
2.PED compliance to sound engineering practice