TH2819XB--a newly-developed product on the basis of TH2818XB transformer test system
Port: Shenzhen
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100 Piece/Pieces per Day
Payment Terms: T/T,MoneyGram
Contact Supplier
TH2819XB meter -------- a newly-developed product on the basis of TH2818XB transformer test system--------FREE SHIPPING
TH2819XB is a newly-developed product on the basis of TH2818XB transformer test system with the features of TH2818XB, including easy operation, accurate and stable reading. It has smaller size than TH2818XB, nice appearance, and lower cost. TH2819XB is an automatic transformer multi-parameter measurement instrument used for quality control of electronic transformer over a wide range of frequency (20 Hz to 200 kHz). Almost all low-voltage transformer parameters can be scanned, including the primary parameters of inductance L, leakage inductance Lk, turns-ratio Tr, DC resistance DCR, impedance Z, and capacitance (between windings) C etc., and the secondary parameters of quality Factor Q , ESR and phase etc., and pin short can also be detected as well. The advanced digital sampling technique and long-life high-speed scanning test fixture make the transformer inspection more accurate and efficient, which used to be of low efficiency before such a system was used. The system provides several signal output impedances for selection in order to be compatible with some well-known LCR instrument providers when an inductor is measured. Turns-ratio is calculated by the inductance of primary and secondary windings, which decreases the measurement error caused by large leakage of magnetic flux, for example low-coupling coefficient transformer. With high measurement speed, wide measurement range, and 6-digit resolution, TH2819XB can be used in quality control on production line, incoming inspection and lab measurement.