Zahn Cup
1. High quality and reasonable price
2.Professional design
3.Great after-sales service, one year warranty
Port: Shenzhen
Minimum Order Quantity: 10 Piece/Pieces Haida
Supply Ability: 1000 Set/Sets per Month Haida
Payment Terms: L/C,D/A,T/T,Western Union
Contact Supplier
Packaging Detail: Strong Wooden Case
Delivery Detail: 15 days after order
Zahn Cup
Zahn cup is a viscosity measurement device widely used in the paint industry. It is commonly a stainless steel cup with a tiny hole drilled in the center of the bottom of the cup. There is also a long handle attached to the sides. There are five cup specifications, labeled Zahn cup #x, where x is the number from one through five. Use large number cup sizes when viscosity is high, use low number cup sizes when viscosity is low.
To determine the viscosity of a liquid, the cup is dipped and completely filled with the substance. After lifting the cup out of the substance the user measures the time until the liquid streaming out of it breaks up, this is the corresponding "efflux time".
On paint standard specifications, one denotes viscosity in this manner: efflux time, Zahn cup number.
Conversion
One can convert efflux time to kinematic viscosity by using an equation for each cup specification number, where t is the efflux time and ν is the kinematic viscosity in centistokes.
Zahn Cup #1: ν = 1.1(t - 29)
Zahn Cup #2: ν = 3.5(t - 14)
Zahn Cup #3: ν = 11.7(t - 7.5)
Zahn Cup #4: ν = 14.8(t - 5)
Zahn Cup #5: ν = 23t
Specifications:
| Model | Cup Volume | Hole Diameter | Viscosity Range | Fluid Run Out Time |
| Zahn1# | 44ml | Φ1.93mm | 5-60cSt | 35-80sec |
| Zahn2# | 44ml | Φ2.69mm | 20-250cSt | 20-80sec |
| Zahn3# | 44ml | Φ3.86mm | 100-800cSt | 20-80sec |
| Zahn4# | 44ml | Φ4.39mm | 200-1200cSt | 20-80sec |
| Zahn5# | 44ml | Φ5.41mm | 400-18000cSt | 20-80sec |
Model No.: YFW-1000A
Features: Dynamic Balancing Machine Special for Fan
1)19 inch color LCD monitor
2)industrial control computer
3)Windows system
Model No.:
Features: dismantling tools Pump tools common rail tools common rail pump and injector repairing tools.
Model No.:
Features: common rail tools, dismantling tools pumps , injectors, repairing tools.
Model No.: YYQ-160
Features: Horizontal Universal Dynamic Balancing Machine(lap belt drive) YYQ-160used for rotor with regular shape or irregular shape.
Model No.: YYQ-1000A
Features: roller balancing machine
rotor balancing machine
horizontal balancing machine
Model No.: ZLT-DL
Features: Conform to IEC60950 clause 4.2.5 and figure 4A.
Model No.: Vicat
Features: Standard cement vicat test set
Needle apparatus for normal consistency and setting time test
Model No.: CR-100A
Features: electric fuel pump test bench
1.test CR pump and injector
2.with DRV
3. test CR pump by flow meter sensor
Model No.: ZC3-A
Features: Dial type Concrete Resiliometer
10~60MPa Concrete Test Hammer
2.2J impact energy with 75mm strike stroke
Model No.: KC-CR100
Features: common rail test bench KC-CR100 can test common rail BOSCH, DELPHI, DENSO, SIMENS pumps and injectors
Model No.: KC-HEUI200
Features: HEUI System Test Bench: is designed to test up to four HEUI injectors, which are equipped on the following engines.
Model No.: KC-215
Features: common rail test bench KC-CR100 can test common rail system BOSCH, DELPHI, DENSO models of pumps and injectors.