electronic digital 12v dc timer
1. 16 ON & 16 OFF
2. 1 NO&1 NC
3. battery: rechargeable
4. CE,DIN rail
Port: shanghai
Minimum Order Quantity: 100 Piece/Pieces more
Supply Ability: 10000 Piece/Pieces per Week more
Payment Terms: L/C,T/T,Western Union,MoneyGram
Contact SupplierPackaging Detail: carton
Delivery Detail: 4-5 days
electronic digital 12v dc timer
Working voltage can be customized:12VDC,24VDC,48VDC,110VAC,220VAC,380VAC
Quality warranty:1year
1. 16 ON & 16 OFF
2. 1 NO&1 NC
3. battery: rechargeable
4. CCC & CE
5.Warranty:1year
Function and Application
weekly programmable electronic digital timer can automatically switch on and switch off the power supply of various kinds of electric equipment, according to customer’s fixed time. It is widely used in programmable control of electric cooker, booster, lamp, water heater, sprayer, bottler, preheater, agriculture facilities and broadcasting equipment etc.
Technical Specifications
Rated voltage: 220V/50Hz Voltage scope: 85%~110%
Capacitance Load: 16A Program: 16 ON / 16 OFF
Consumed power<5VA Timing error <±2s/day(25°C±1°C)
Timing Control Range:1min~168h Installation: guide rail
Temperature:-10°C~+60°C Relative Humidity: <95%
Dimension:36×86×65mm Weight:120g
Operation instructions
First time use this timer switch, please input power supply and let battery recharge.
1. Adjust Clock
l Before using, please check the clock display to follow the current time, and calibrate it.
l Hold down the "CLOCK" key, meanwhile adjust respectively the key “HOUR”, “MINUTE” and “DAY” in accord with the current time.
2. Time setting
step | key | Setting content |
1 | Press the key "P" | The first switch-on setting(display 1ON) |
2 | Press the key "H+" and "M+" | Setting switch-on time (hour, minute) |
3 | Press the key “D+" | Working Mode: set the switch-on working days |
4 | Press the key "P" again | The first switch-off setting(display 1OFF) |
5 | Press the key "H+" and "M+" again | Setting switch-off time (hour, minute) |
6 | Press the key "“D+"" again | set the switch-off working days |
7 | Repeat step 1 to 6 | Set other 2ONand2OFF, 3ONand3OFFuntil 16ONand16OFF(if no, pls make it display “— — : — —” ) |
8 | Press the key " " | End the setting and enter to the state of clock display. |
9 | Press the key " MANUAL" | Adjust on-off sign to the current state "ON" or "OFF" and adjust to the position of "AUTO". |
Notice: When make an error or cancel the settings, press "C/R "key to make it display “— — : — —” ( it means no timing program, not "00:00").
If you set the switch-on time, you must set the switch-off time to correspond.
3. For example
Some electrical equipment needs to switch on 19:00, and switch off 08:00 next day.
A. Follow the steps 1, 2, 3, and make it display as Figure 1a;
B. Follow the steps 4,5,6 and make it display as Figure 1b;
C. Follow the step 7, and make each group 2ONand2OFF, 3ONand3OFFuntil 16ONand16OFFdisplay as“— —:— —”.
D. Follow the steps 8, 9 and adjust the work mode to the state of "AUTO".