ZG106 CO2 Gas Detector,CO2 Detectors,Gas Detectors, Gas Detection - ZG106

CO2 Gas Detector,CO2 Detectors,Gas Detectors, Gas Detection ZG106

Feature:

1)Ultra low cost CO2 Monitor achieved by New IR-SoC Technology
2) It uses NDIR technology to improve the long term stability.
3) Portable, accurate handheld CO2 Monitor.
4) The Alarm mode will sound at 1000 PPM or adjust the alarm level.
5) Max/Min mode.

6)There are several Modes which we can adjust the setting parameters. These modes are Alti Mode,Alarm Mode, Outside Mode, Ucal Mode, Datalogger Mode, MaxMin Mode and rcFS Mode in sequence.

Specification:

Measurement range: 0~3,000ppm;
Resolution: 1ppm at 0~1,000ppm; 5ppm at 1,001~2,000ppm; 10ppm at 2,001~3,000ppm;
Accuracy: ±50 ppm or ±5% of reading;
Repeatability: ±20 ppm;
Temperature Dependence: ±0.1% of reading per °C or ±2 ppm per °C,whichever is greater, refer¬enced to 25°C;
Pressure Dependence: 0.13% of reading per mm Hg (Corrected via user input for altitude);
Response Time: <2min for 63% of step change;
Warm-Up Time: <60 seconds at 22°C;
Output: OC: Normally Low,100mA max. @ 24VDC. Adjustable setpoint, factory setting is 1000ppm,hysteresis is 50ppm
Power supply:Two power supply types
1. Battery type: Alkaline, AA* 4 (80 hours)
2. External: 6 VDC from external AC/DC adapter which is included in package(Use pecified AC adapter only)
Power Requirement 160 mA Peak, 15 mA average from 6V
General operating conditions: Operating Temperature: 32-122°F (0-50°C) 0-95% RH, non-condensing Storage Temperature: -4 to 140°F (-20 to 60°C)