O2 Concentration Meter
1.Range 0-2% O2
2.Analog output 4-20mA
3.Explosion-proof with intrinsic safe type sensor unit
Port: ZhengZhou
Minimum Order Quantity: 1 Piece/Pieces .
Supply Ability: 10 Piece/Pieces per Week .
Payment Terms: T/T
Contact SupplierPackaging Detail: Carton Box
Delivery Detail: 4 weeks
ZA-2010 on-line Oxygen Concentration Meter
Brief introduction
ZA-2010 on-line Oxygen Concentration Meter represents the up-to-date technology for oxygen measurement, the intrinsic safe probe has the performance of high precision, resistance against corrosion of weak acid and weak base, and therefore, it can be used for measurement of oxygen content in many domains.
The sensor of ZA-2010 was powered by the fuel battery with the up-to-date technology, and its life term is beyond 3 years.
The innovative design of battery is to output with negative signal, and the loss of energy and leakage of electricity quantity are reduced. The battery is not affected by other background gas or hydrocarbon and acid gases.
In order to make the use of ZA-2010 more reliable, we have designed a perfect sampling system, which can effectively remove impurity and moisture, meanwhile, in order to match with site installation, the sampling system can be selected according to the actual circumstance on site.
ZA-2010 control unit ZA-2010 sampling system
Main features
Technical parameters
Range | 0…2% O2 | |
Precision | ±0.03% | |
Repeatability | ±0.01% | |
Response time | 20 seconds | |
Analog output | 4…20mA (maximum load 800Ω) | |
Alarm output | DC24V 1A (two-way alarm output, independent programming is available) | |
Operation temperature | -10…40°C | |
Degree of protection | IP66 | |
Intrinsic safe | Ex iaII C T3 | |
Installation mode | Control unit | Plate mounting onto the control cabinet dimension:139mm×139mm×147mm(0.5kg) |
Sampling system | Wall mounting to the site dimension: 600mm×450mm×70mm (9kg) |