Explosion Protection Transducer
1. Dimensions: aluminum alloy, 72*132mm
2. Weight: about 450g
3. Output current: 4~20mA
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets updated price
Supply Ability: 200 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union,MoneyGram,Escrow
Contact SupplierPackaging Detail: standard package
Delivery Detail: depends on the quantity
YD9400 Explosion Protection Vibration Transducer
Explosion-proof 4-20mA vibration velocity sensor can connect to the job site of PLC system.
IEC 60079-10 explosion-proof certification
1. Overview
YD9400 Integrated Explosion-proof Vibration Transmitter is mainly installed on the bearing cover of various rotating machinery (such as steam turbine, compressor, fan and pump etc.), capable of measuring the vibration velocity or vibration amplitude. The moving coil cuts magnetic lines to generate voltage, and the transmitter convert it to current output. The transmitter has the advantages of small size, water proof, stable performance, easy installation and so on.
2. Technical Parameters
Measuring range
Vibration amplitude: *0~200um; 0~500um; 0~1000um
Vibration intensity: 0~10.0mm/s; *0~20.0mm/s; 0~50.0mm/s
(* is the default range)
Frequency response: 5 ~ 500 Hz
Natural frequency of vibration: 10Hz
Output current: 4~20mA
Output impedance: ≤500Ω
Working voltage: DC24V
Connecting mode: two wires (DC24V Power and 4 ~ 20mA use 2 wires) or three wires ( ground wire, power wire and output wire )
Maximum acceleration: 10g
Measurement direction: horizontal or vertical
Environmental conditions: temperature is -40°C~85°C, relative humidity ≤90%
Dimensions: aluminum alloy, 72×132mm
Weight: about 450g
Mounting screw: M20 x 1.5 x 20mm ( length)
3. Mounting
Mounting position: vertical or horizontal install on the measured vibration point, fix it by M20 x 1.5 x 20 screw on the bottom of the transmitter.
4. Model selection instructions:
Measuring range:
1-0~200um; 2-0~500um; 3-0~1000um ( Vibration amplitude )
4-0~10.0mm/s; 5-0~20.0mm/s; 6-0~50.0mm/s ( Vibration intensity )