X60-dual frequency GPS Receiver - X60-dual frequency

X60-dual frequency GPS Receiver

Information

Integrating the mainboard, memory and the radio in one housing, CHC X60 receiver featured of its globally

adopting technologies.

Features

One-Touch Easy Static/Fast Static Survey Operation

The five indicator LEDs allow you to monitor the entire progress, including satellite status, data recording

status, power and radio signal. Each of the batteries supports your fieldwork up to 8 hours(Static).

DL3 Radio, adjustable to suit your requirement

You can adjust the frequency of transmission to suit your requirements

Wide band, multi-frequency ranging from 438MHz- 470MHz

Low power consumption

Signal is less prone to interference

UHF/VHF Radio antenna, for strong

signal detection

Strong signal strength of 7Db

Multi-frequency detection ranging from 438MHz-470MH

Technical Parameters

Performance Specifications

24 parallel channels, L1 C/A code, P code, L1/L2 full cycle carrier

Accuracy

Mode :static, fast static

Horizonta: ±5mm+1ppm RMS;

Vertica:±10mm+1ppm RMS

Mode:post-processed, work and stop, continue

Horizonta:±10mm+1ppm RMS;

Vertical:±20mm+1ppm RMS;

Mode:RTK

Horizontal:±10mm+1ppm RMS;

Vertical:±20mm+1ppm RMS;

Data output rate:0Hz;

Working distance:10—28KM;

First position time

Cold start-up:60s;

Warm start-up:10s;

Twice start-up:1s;

Environment

Fully sealed, waterproof, dust-resistant, shock-resistant

Operating temperature:-30 to +75

Storage temperature:-40to +80

Physical

Dimension:20cm×13cm×5cm

Weight:0.8kg of the main unit including battery

Power

The power of the base station (It can use the car battery to support the unit and/or can charge the battery of

the receiver.)

Operating time: more than 12 hours;

Charge time: less than 4 hours;

The power of the rover station (It is lithium battery.)

Operating time: more than 10 hours;

Charge time: less than 6 hours;

Note: the two batteries in the rover receiver will work alternately intelligently.