X-ray Fluorescence spectrometer - HRX- 1800B

HRX-4500B X-Ray Fluorescence Spectrometer

Application

Steel and iron inspection, full-elements analysis, hazardous elements inspection (RoHS, halogen and others)

Technical specification

Measurable elements:from Na to U

Range of element content: ppm-99.9% (different elements will caused the different analysis range)

Ability of simultaneous analysis: dozens of elements

Analysis Accuracy 0.05% (Sample with 96% of content, 21 times test stability)

Measurement time: 60-200 seconds

Energy resolution:145±5 eV

Tube voltage: 5KV—50KV

Tube current: 50uA—1000uA

Forms of samples: powder, solid and liquid

Input power: AC 110V/220V

Ambient temperature:15°C-30°C

Ambient humidity: 35%-70%

Chamber volume of sample: 320mm×100mm

Overall dimension: 660mm×510mm×350mm

Weight: 65Kg

Performance feature

High efficacy and ultra thin window X light pipe, the technology has reached the advanced level.

Digital multi-channel technology for shorter measurement time, higher accuracy and better measure results for the steel and alloy. The counting rate can reach 100000CPS.

SDD Si drifted detector, better energy linear, energy resolution, energy spectrum specification and higher peak back rate.

In-built SNE improves the signal processing ability up to 25 times.

X- Ray with low energy can motivate the measured elements. Motivating result is better for light elements such as Si, P and others.

Intelligent vacummizing system is to shield the air fluency and expand the measurement arrange greatly.

Automatic spectrum-stabilizing device is to ensure the consistency of the instruments.

High signal-to noise ratio electronic circuit units.

Different collimator and filter will be switched automatically for different products. And cockamamie manual operation will be avoided.

Solution spectrum technology is to resolve the spectrum peak, which ensures the same analysis accuracy for different elements.

Many parameters linear regression method is to greatly restrain the absorbing and strengthening effect of each element.

Built-in High definition camera.

Specification such as tube pressure, tube current and vacuum will be displayed on the liquid crystal display.

Standard features

High efficient ultra-thin window X ray tube

SDD Si drifted detector

Digital multi-channels

High signal-to noise ratio

Test special parts for the steel industry

High Signal-to-noise ration electronic circuit units

Build-in high definition camera

Automatic swatch collimator and filter

Automatic spectrum-stabilizing device

Triple safety protection mode

Independent of each other matrix effect calibration model

The whole steel structure can guarantee dynamics

Liquid crystal display with size of 90mm×70mm

Vacuum pump